RCA RCR312W Owner/User Manual: RCR312W - Page 1

RCR312W Universal Remote Control Owner's Manual Manual del Propietario (parte posterior) Illuminated on/off key Serves as an indicator light to provide feedback. Component keys. (tv, vcr•DVD, SAT•CBL) Backlight key turns backlighting on/off. INFO key displays information pertaining to the component you are currently controlling. CH and VOL keys have dual functions. They act as navigation keys (up, down, right, and left arrow keys) in menu systems. Dedicated MENU key for DVD disc menus, satellite receivers and some TVs. SLEEP key allows you to set a time to turn off your TV automatically. INPUT key on some remotes, this is called the TV/VCR key. It toggles through all the video sources connected to your TV. Transport keys REVERSE, PLAY, FORWARD, RECORD, STOP and PAUSE keys. Actual model may vary from picture shown Three-Component Universal Remote Congratulations on your purchase of this three-component universal remote. This universal remote controls up to three electronic components and makes juggling remote controls a thing of the past. Your remote is guaranteed to work with all brands of components. The three-component universal remote is easy to use, easy to program and gives you control at the touch of your fingertips. SAVE THIS MANUAL AND THE CODE LISTS! Remote controls can sometimes lose their programming when you change the batteries. Make sure you keep the manual and code lists in a safe place so that you can reprogram the remote if you need to. Tip: The three-component universal remote is already programmed to operate most RCA, GE and PROSCAN branded TVs, DVD players and satellite receivers. Just press the corresponding key-VCR•DVD for a DVD player; TV for a television; SAT•CBL for a satellite receiver. Battery Installation and Information Your universal remote requires two AA Alkaline batteries (batteries may or may not be included, depending on model). To install the batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery compartment. 3 Press and push the battery cover back into place. Note: If you are replacing batteries, try not to press any keys after you've taken the old batteries out. Pressing keys while replacing batteries causes the remote to lose the components you've programmed. You will need to program the remote again. Battery Precautions: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium) batteries. • Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations. Battery Saver Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your battery life should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions. Backlighting Backlight illumination enables you to see the remote control keys better in the dark. Backlight illumination is toggled on or off with successive keypresses of the backlight key. When toggled on, the backlighting remains on as long as keys are being pressed. The backlighting turns off six seconds after the last keypress. Once the backlight time has expired, any keypress will reactivate backlighting. If the backlight illumination is on, and the backlight key is pressed, the backlight turns off. Illuminated ON•OFF Key The ON•OFF key powers components on and off. It also lights up to serve as an indicator light, providing feedback for various functions. When a valid key is pressed, the illuminated ON•OFF key remains lit as long as the key is pressed and turns off when the key is released. The ON•OFF key also blinks in Programming Mode or in Menu Mode to provide feedback. Care and Maintenance • Keep the remote dry. If it gets wet, wipe it dry immediately. • Use and store the remote only in normal temperature environments. • Handle the remote gently and carefully. Don't drop it. • Keep the remote away from dust and dirt. • Wipe the remote with a damp cloth occasionally to keep it looking new. • Modifying or tampering with the remote's internal components can cause malfunction and invalidate its warranty.