RCA RCR6473 Owner/User Manual: RCR6473 - Page 1

RCR6373/RCR6473 Universal Remote Control Owner's Manual Manual del Propietario (parte posterior) Transport keys, including SKIP and SLOW, give you better DVD/ DVR control INFO key displays information for the component you're controlling Dedicated MENU key lets you access advanced component functions Actual model may vary from picture shown Component keys (TV, SAT•CBL, DVD, DVR•AUX1, AUDIO, VCR•AUX2) SLOW•ASPECT key changes between full- and widescreen formats on HDTVs Dedicated GUIDE key gives you easy access to program guides Arrow keys for navigating your components' menu systems Six-Component Universal Remote Congratulations on your purchase of this six-component universal remote. This universal remote controls up to six electronic components and makes juggling remote controls a thing of the past. Your remote is guaranteed to work with all brands of components. This remote is unusually versatile because it has two AUX keys that you can program to control any video component. The six-component universal remote is easy to use, easy to program, and gives you control at the touch of your fingertips. SAVE THIS MANUAL AND THE CODE LISTS! Remote controls can sometimes lose their programming when you change the batteries. Make sure you keep the manual and code lists in a safe place so that you can reprogram the remote if you need to. Tip: The six-component universal remote is already programmed to operate most RCA, GE, and PROSCAN branded TVs, VCRs, DVD players, and satellite receivers. Just press the corresponding key-DVD for a DVD player, TV for a television, SAT•CBL for a satellite receiver, etc. Battery Installation and Information Your universal remote requires two AAA alkaline batteries (batteries may or may not be included, depending on model). The INPUT and - (dash) key has three functions, it (1) toggles through all the video or audio sources connected to your TV or audio component; (2) toggles between VCR and the TV input; (3) lets you separate the main channel number from the sub-channel number in digital channel numbers To install the batteries: 1. Remove the battery compartment cover. 2. Insert the batteries, matching the (+) and (-) marks inside the battery compartment. 3. Push the battery cover back into place. Note: If you are replacing batteries, try not to press any keys after you've taken the old batteries out. Pressing keys while replacing batteries causes the remote to lose the components you've programmed. You will need to program the remote again. Battery Precautions: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickelcadmium) batteries. • Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations. Battery Saver Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your battery life should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions. Care and Maintenance • Keep the remote dry. If it gets wet, wipe it dry immediately. • Use and store the remote only in normal temperature environments. • Handle the remote gently and carefully. Don't drop it. • Keep the remote away from dust and dirt. • Wipe the remote with a damp cloth occasionally to keep it looking new. • Modifying or tampering with the remote's internal components can cause malfunction and invalidate its warranty.