RCA RCRP05BR Warranty Card - Page 1

Cable Replacement Remote RCRP05B Universal Remote Control Owner's Manual Manual del Propietario (parte posterior) Introduction The RCRP05B Cable Replacement Remote by RCA is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: • Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder) • Programmable MASTER POWER key for master on/off control of your home entertainment equipment with a single keypress • Programmable Macro Keys to consolidate multi-step actions into a single keypress • Channel Lock to lock channel selection only to the cable box or satellite receiver • Volume Lock to lock volume controls to one mode or individual modes • Code Search to help program control of older or discontinued components • Color-coded keys to quickly locate popular functions for cable and satellite • Code library for popular video and audio devices Before using the product, you will need to install batteries and also perform some programming to operate the specific home entertainment devices you wish to control. Installing Batteries 1. On the back of the remote control, push the tab and lift off the battery cover. 2. Insert two (2) AA batteries (not included). Match the + and - marks with those in the battery case, then insert them. 3. Align the covers keys with the cases holes and press the cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. NOTE: When batteries need replacement, the remote control will cease to operate. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings. Battery Precautions: • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. • Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations. Features and Functions Use the illustration below to locate features on the RCRP05B Cable Replacement Remote and then study the key descriptions below to learn how they function. To find out what type of devices can be controlled by each device key after programming, see the "Device Table" section. TV, DVR/AUX, CBL/SAT, DVD/VCR, and AUD select a home entertainment device to control. Also see the "Device Table" section. Each device key has an embedded LED (red light) that blinks upon selection and indicates the remote control is working and (after programming) is sending signals. NOTE: If you have a digital TV converter, you can program it to the CBL/SAT or DVR/AUX keys. POWER/MASTER POWER turns on or off a home entertainment device. For MASTER POWER control, see the "Using the Master Power Key" section. SETUP is used in all programming sequences. LIVE commands your PVR/ DVR to return to watching live TV. LIST displays a list of recorded shows on your PVR/ DVR. (replay) commands your PVR/DVR set-top box to instantly replay the last 7 seconds of a program you are watching. (skip forward, reverse, play, forward, stop, pause, record) In all modes except CBL/SAT, use these keys to control a VCR, DVD player, or a PVR (after selecting a desired device). To record in DVD/VCR mode, press twice. In CBL/ SAT mode, use these keys to control the DVR/PVR functions of the cable box or satellite receiver. MENU displays the active device's menu system. INFO displays the current channel and program information. Navigation keys move the cursor in the program guide and menu screens and navigate within the interactive service. OK chooses options, PPV events, and tunes to programs from the program guide. GUIDE displays the program guide. EXIT leaves (or clears) your device's menu or guide. DAY +/- moves a day forward (or back) on your device's program guide. PAGE +/- moves up or down one screen at a time through menu screens and the program guide. A,B,C,D (red, green, yellow, blue) access additional features on your cable box, satellite receiver, or Blu-ray disc player (see your device manual for details). VOL +/- raises (or lowers) the audio volume. ON DEMAND accesses your program provider's Video on Demand services. The ON DEMAND key may not work with your program provider. Test the key, and if it doesn't take you to your program provider's On Demand service, you can program the ON DEMAND key to access the service. See the "Programming Macro Keys" section later in this manual for more information. CH+/- selects the next higher (or lower) channel. For DVD players, use these keys to skip forward (or reverse) through chapters. For amplifiers/receivers, use these keys to select the next higher (or lower) preset station. NOTE: By default, the CH+/- keys change channels on the CBL/SAT device regardless of what mode you're in. To change the way the CH+/- keys work, see the "Programming Channel Control Lock" section. MUTE turns the sound off or on. FAV cycles through your favorite channels on your cable box or satellite receiver. LAST recalls the last channel. Number keys (1-9, and 0) tune directly to channels (e.g., 09). For amplifiers/receivers, use the keypad numbers to select inputs 1 through 10. - accesses digital sub-channels (for example, 8.1 or 8.2). ASPECT changes the aspect ratio of the show you are watching. (Not available on all devices). PIP turns the Picture-In-Picture feature on or off (if available on your device). SWAP switches PIP images and sound between the main and window pictures. MOVE moves the PIP window to different positions on your TV screen. PIP CH +/- are used to select the next higher or lower channel and is displayed on your PIP window. INPUT in CBL/SAT mode is used to view other video sources (A or B). In other modes, use INPUT to switch between the source inputs on the device you are controlling. MACRO1 and MACRO2 are reserved for use as macro keys (see the "Programming Macro Keys" section). Device Table NOTE: Please refer to the table below when performing the instructions in the "Programming Device Control" or "Setting Up a Combo Unit" sections. After programming, the RCRP05B Cable Replacement Remote will be able to control the following types of devices: TV DVR/AUX Television DVR, PVR, or auxiliary TV, DVD player, VCR, or digital TV converter CBL/SAT DVD/VCR AUD Cable box, satellite receiver, or digital TV converter DVD player, VCR, TV/VCR combo, or TV/DVD combo Audio amplifier, tuner, or receiver Programming Device Control Before you can start using this remote, you must program it to control your components. NOTES: The RCRP05B Cable Replacement Remote is preprogrammed to operate an RCA TV, a Toshiba DVD player, an RCA VCR, a Pioneer audio receiver, and a Motorola cable box. If you own these brands of these devices, test the remote with them. If they work, you do not have to program the remote to operate them. For control of a Combo device (for example, a TV/VCR combo), skip this section and perform the instructions in the "Setting Up a Combo Unit" section. Also refer to the "Device Table" to find out which devices can be programmed onto each device key. 1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc). NOTE: Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2. 2. On the remote control, press a device key once (i.e., DVD/ VCR, DVR/AUX, AUD, TV, or CBL/SAT); it will blink once. 3. Press and hold SETUP until the selected mode key blinks twice, then release SETUP. 4. Use the codes in the accompanying code list to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice. NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try entering the same code again. 5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see the "Searching for Your Code" section). NOTE: If the device does not have a POWER key (e.g., DVD and VCR), press the (Play) key. 6. Once you've found a code that turns your device on and off, test other remote commands for that device (e.g., volume, channel, menu, etc.). NOTE: By default, the CH+/- keys change channels on the CBL/SAT device regardless of what mode you're in. So, you should only use these keys to test for CBL/SAT device codes at this point. 7. Repeat steps 1 through 6 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes below. DVD/VCR Code: DVR/AUX Code: AUD Code: CBL/SAT Code: TV Code: Setting Up a Combo Unit If you own a combo unit such as a TV/VCR Combo or a TV/ DVD Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device: 1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/ DVD Combo, insert a DVD). 2. On the remote control, press DVD/VCR once; it will blink once. Then press and hold SETUP until the DVD/VCR key blinks twice. 3. Use the codes in the accompanying code list to locate the brand name and enter the first four-digit code for your combo device (for example, TV/VCR). If you perform this procedure correctly, the DVD/VCR key will blink twice. NOTE: If the DVD/VCR key did not blink twice after entering the codes last digit, repeat steps 2 and 3 and try entering the same code again. If you've located a setup code that works for your combo device (for example, a TV/VCR Combo) and a separate TV code is also listed, you'll need to program this code into the remote control to access volume control (see the "Programming Device Control" section). 4. Aim the remote control at your combo device (for example, TV/VCR Combo) and press POWER once. The device should turn off. If it does not respond, repeat steps 2 and 3, trying each code listed for your brand until you find one that works. If it still does not respond, try searching for the code (see the "Searching for Your Code" section). 5. For future reference, write down each working device code in the boxes below: TV/VCR or TV/DVD Code: TV Code (if used): Searching For Your Code If your home entertainment device does not respond to the RCRP05B Cable Replacement Remote after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 3. Enter 9 9 1. The TV key will blink twice. 4. Aim the remote control at the TV and press POWER once. 5. Press and release the CH+ key continuously, then stop when the TV turns off. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. 6. Press POWER. The TV should turn on, then press SETUP once to lock in the code. The LED will blink twice to indicate that the code is saved. NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through the codes, then press SETUP when the TV turns on. 7. Test other remote commands for the TV (e.g., volume, menu, etc.). If the commands you want to use with your TV work, you've finished programming for your TV. If they don't, repeat steps 1-4 above. In step 5, don't stop when your TV turns off the first time-keep pressing CH+ until it turns off again. NOTE: By default, the CH+/- keys change channels on the CBL/SAT device regardless of what mode you're in. So, you should only use these keys to test for CBL/SAT device codes at this point. 8. To search for the codes of your other devices, repeat steps 1 through 7, but substitute the appropriate key (e.g., DVD/VCR, DVR/AUX, AUD, or CBL/SAT) for the device you're searching for. Checking the Codes If you have set up your remote control by searching for your device code, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks twice. 2. Enter 9 9 0. The TV key will blink twice. 3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the left-most TV Code box in the "Programming Device Control" section. NOTE: If a code digit is 0, the selected mode key will not blink. 4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. Finish writing down the code in the TV Code boxes. 5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., DVD/VCR, DVR/ AUX, AUD, or CBL/SAT) for the device you are checking. Write down the codes in the appropriate boxes in the "Programming Device Control" section. Using Learning The RCRP05B Cable Replacement Remote includes a Learning feature so you can add functions that are unique to your home entertainment devices (e.g., VCR tracking up or down). Learning Precautions • Your original remote controls must be in working order for learning to work properly. • Learned keys are mode-specific, so each one can store a unique function for each mode. • Do not use the following keys for learning: device keys, SETUP, (Record), Macro keys. • Learning capacity is up to a total of 50 keys, depending on the code being learned. • Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. • For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 5. NOTE: If the LED displays one long flash instead, either your batteries are low, or the RCRP05B Cable Replacement Remote has a memory fault. 2. Press a mode key once (i.e., DVD/VCR, DVR/AUX, AUD, TV, or CBL/SAT) to assign a mode for learning. 3. Press the desired key on the RCRP05B once to store the feature to be learned. 4. Place the RCRP05B Remote Control head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that you want the RCRP05B Cable Replacement Remote to learn. 2" 5. On the original remote, press and hold the key to be learned. The device key's LED will blink rapidly, then turn off. Continue holding the key on the original remote until the device key LED blinks twice. NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the "Learning Precautions" earlier in this section. If needed, also see "Troubleshooting" later in this manual. After review, start programming again at step 1. 6. Repeat steps 2 through 5 for another mode and/or key or press and hold SETUP until the active mode key LED blinks twice to exit programming. Deleting a Single Learning Key This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see the "Programming a Learned Key" section) NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6. 2. Press a mode key once (i.e., DVD/VCR, DVR/AUX, AUD, TV, or CBL/SAT). The LED on the selected mode key will blink once. 3. Press the key containing the learned function to be deleted twice. The active mode key will blink twice. 4. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming. Deleting All Learned Keys in a Specific Mode NOTE: If more than 15 seconds pass between key presses, the remote exits programming. 1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6. 2. Press a mode key twice (i.e., DVD/VCR, DVR/AUX, AUD, TV, or CBL/SAT) to clear all the learned keys for that mode. The mode key LED blinks twice. 3. Repeat step 2 for another mode or press and hold SETUP to exit programming. Programming Channel Control Lock By default, in TV mode the remote control's channel-control capabilities are locked to the cable box or satellite receiver. The affected keys are 1 through 0, CH+, CH-, and LAST. This will guarantee that you do not inadvertently change a channel on your TV. However, you can deactivate this feature to allow full access to these keys in TV mode. Unlocking Channel Control 1. On the remote control, press CBL/SAT once; it will blink once. Press and hold SETUP until the CBL/SAT key blinks twice. 2. Enter 9 7 3. The CBL/SAT key will blink twice. 3. Press CH- once. The CBL/SAT key will blink four times. Now the remote control will provide TV and VCR channelcontrol capabilities while in the TV or VCR mode. Locking Channel Control to CBL/SAT 1. On the remote control, press CBL/SAT once; it will blink once. Press and hold SETUP until the CBL/SAT key blinks twice. 2. Enter 9 7 3.The CBL/SAT key will blink twice. 3. Press CH+ once. The CBL/SAT key will blink twice. Now, regardless of what mode you select (except AUD), the channel keys will only change channels on your set-top box. Changing Volume Lock Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the RCRP05B Remote Control, Global Volume Lock is set to TV, so you can control TV volume while in the DVD/VCR, DVR/AUX, TV or CBL/SAT mode. You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. NOTE: The audio mode's (AUD) volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will have control of the audio device's volume in all other modes (i.e., DVD/VCR, DVR/AUX, TV, and CBL/SAT). This can be an advantage if, for example, you always listen to home entertainment devices through your receiver's speakers. Unlocking Volume Control for a Single Device (Individual Volume Unlock) 1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g., CBL/ SAT) and press it once. Next, press and hold SETUP until the device key blinks twice. 2. Enter 9 9 3. The last-selected device key will blink twice. 3. Press VOL- once. The last-selected device key will blink four times. 4. Repeat steps 1 through 3 for each device you want volume to be unlocked. Now, after you select a device that has volume unlocked (e.g., CBL/SAT), pressing VOL+, VOL-,or MUTE, will control only that device's volume. Unlocking All Volume Control (Global Volume Unlock) NOTE: Performing these instructions will set independent volume control for all programmed devices. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 9 3. The last-selected device key will blink twice. 3. Press VOL+ once. The last-selected device key will blink four times. Locking Volume Control To One Mode (Global Volume Lock) NOTE: The audio mode's volume controls are active regardless of Volume Lock settings. However, if you lock the volume controls to the AUD mode, you will control the audio device's volume in all other modes (i.e., DVD/VCR, DVR/AUX, TV, or CBL/SAT). This can be an advantage if, for example, you always listen to home entertainment devices through your receiver's speakers. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 9 3. The last-selected device key will blink twice. 3. Select a mode (e.g., TV or AUD) which you want to use to control the volume. The selected device key will blink twice. Now, when you press VOL+, VOL-,or MUTE, the volume of the selected device (e.g., TV) is controlled regardless of mode. Programming Macro Keys The RCRP05B Cable Replacement Remote includes two macro keys (located directly below the SWAP and MOVE keys). Macro keys allow you to set up key macros to activate certain keys in a specific order. For example, you can set up a key macro to change the channels on your TV, raise or lower the volume, and start recording on your VCR, all with the touch of one key. If you want to change the macros stored in a previously-programmed macro key, you'll need to clear the key first (see "Clearing a Macro Key" later in this section). Programming a Macro Key 1. On the remote control, press and hold the SETUP key until it blinks twice. 2. Enter 9 9 5. The SETUP key blinks twice. 3. Select a macro key (for example, MACRO1) and press it once. 4. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press the TV mode key once, followed by pressing the VOL+ key once. NOTE: You can program up to 15 key presses into one macro. 5. Press and hold SETUP until it blinks twice. 6. To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4. NOTE: Programming more than five macros on the same macro key overwrites previous settings. Clearing a Macro Key 1. On the remote control, press and hold the SETUP key until it blinks twice. 2. Enter 9 9 5. The SETUP key blinks twice. 3. Press once on the macro key you want to clear. 4. Press and hold SETUP until the active mode key blinks twice. This macro key is now clear and ready for reprogramming (see "Programming a Macro Key" earlier in this section). If desired, repeat these to clear another Macro key. Using The Master Power Key The RCRP05B Remote Control has a unique feature that allows you to sequentially turn on or off up to five of your home entertainment devices with a single key press. NOTE: MASTER POWER (POWER) only works in the CBL/SAT mode. If it is not programmed, only the cable box or satellite receiver will turn on or off. In any other mode, pressing MASTER POWER (POWER) once will turn the selected device on or off. Programming the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 9 5. The last-selected device key blinks twice. 3. Press POWER once. 4. For the first device you want in the power on sequence, press a device key (e.g., CBL/SAT) once. Then press POWER once. For the second device in the power sequence, press its key once (e.g, TV). Then press POWER. 5. Repeat step 4 up to four more times to add the second, third, fourth, and fifth device. 6. To save the settings and exit the program: a. Press CBL/SAT once. b. Press and hold SETUP until the CBL/SAT key blinks twice. Using the Master Power Key 1. After programming, point the remote control at the devices. Press CBL/SAT once. 2. Press POWER once to sequentially turn the programmed home entertainment devices on or off. You will see the devices turn on or off according to the programmed sequence. Clearing the Master Power Key 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 9 5. The last-selected device key blinks twice. 3. Press and release POWER. 4. Press and hold SETUP until the CBL/SAT key blinks twice. Re-Assigning Device Keys The RCRP05B Cable Replacement Remote can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a set-top box, and two audio devices (for example, two audio receivers), re-assign the unused DVD/VCR key to operate the second audio device as follows: NOTE: Performing the steps below will overwrite the device you've programmed for the device key. 1. On the remote control, press DVD/VCR once; it will blink once. Then press and hold SETUP until the DVD/VCR key blinks twice. 2. Enter 9 9 2. The DVD/VCR key will blink twice. 3. Press AUD once, then press DVD/VCR once. The DVD/VCR key will blink twice. The DVD/VCR key is now ready to be programmed for your second audio device. See the "Programming Device Control" section. To re-assign other device keys, repeat these and substitute the key sequence using the following chart: NOTE: Only one device can be assigned to an unused device key at a time. DVD/VCR as 2nd AUD key DVD/VCR->SETUP->9->9->2->AUD->DVD/VCR DVD/VCR as 2nd TV key DVD/VCR->SETUP->9->9->2->TV->DVD/VCR DVD/VCR as 2nd CBL/SAT key DVD/VCR->SETUP->9->9->2->CBL/SAT->DVD/VCR DVD/VCR back to DVD/VCR DVD/VCR->SETUP->9->9->2->DVD/VCR->DVD/VCR To re-assign another unused device key, substitute it for the DVD/VCR key above and then perform the sequence. For example, to re-assign an unused AUD key as a second DVD key, perform: AUD->SETUP->9->9->2->DVD->AUD. When a re-assignment is done, the selected device key (e.g., AUD) will blink twice to confirm your choice. At that time, you will need to program device control (see the "Programming Device Control" section). Clearing Custom Programming The RCRP05B Remote Control contains a Custom Programming Reset program. You can use it to remove all custom programming, except your setup codes and reassigned device keys. IMPORTANT: Executing this program will erase all custom settings for Volume Lock, learned keys, Macro keys, and Channel Lock. However, your device programming remains. 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 8 0. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared. Troubleshooting Device key does not blink when you press a key. Replace the batteries with two (2) new AA batteries (see the "Installing Batteries" section). Device key blinks when you press a key, but home entertainment device does not respond. Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control. The remote control does not control devices or commands are not performing properly. Try all listed codes for the device brand being set up. Make sure all devices can be operated with an infrared remote control. TV/VCR Combo does not respond properly. Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for full operation (see the "Setting Up a Combo Unit" section). No volume on a second TV. Follow instructions in the "Changing Volume Lock" section. (Play) and (Stop) keys do not work on a Motorola DCT-2000 cable converter. Re-program the CBL/SAT key for cable code 0476 (see the "Programming Device Control" section). Tried Search Method and still could not find a working code. Try the Search Method again after clearing out the device key as follows: a. Press and hold SETUP until device key blinks twice. b. Enter 9 9 2. c. Press and release the device key to be cleared twice. Remote control does not turn on Sony or Sharp TV/VCR Combo. For power on, these products require programming TV codes on the remote control. For Sony, use TV code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048. For more information, please visit www.rcaaccessories.com Consumer Help Line: 1-800-420-7968 FCC Notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. This product is covered by one or more of the following U.S. patents: 5,515,052, 6,014,092, 5,255,313, 5,414,761, 5,552,917, 6,097,309, 6,522,262, 5,568,367, 6,330,091, 6,701,091 Care and Maintenance • Keep the remote dry. If it gets wet, wipe it dry immediately. • Use and store the remote only in normal temperature environments. • Handle the remote gently and carefully. Don't drop it. • Keep the remote away from dust and dirt. • Wipe the remote with a damp cloth occasionally to keep it looking new. • Modifying or tampering with the remote's internal components can cause malfunction and invalidate its warranty. Limited Lifetime Warranty Audiovox Electronics Corporation (the "Company") warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the retailer. This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company's opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g. alkaline, standard or rechargeable). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights, which vary from state/province to state/province. U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5 ©2009 Audiovox Accessories Corporation Trademark(s) ® Registered RCRP05B US IB 01