RCA RCU600WMS User Guide - Page 4

RCU600WMS_IB.qxd 6/5/03 16:55 Page 4 Primary Key Descriptions For VIDEO Operations Other Keys (Listed Alphabetically) Certain keys on the six-component universal remote have dual functions. Primary functions are printed in black. Secondary key functions are printed in blue on the remote and are used for AUDIO operations. 0-9 (Number Keys): operate the same as number keys on your original remote and are used to enter component codes when programming the remote control with Direct Entry method. ANTENNA: in TV Mode, switches between the signal coming from a satellite receiver or cable box and an off-air antenna. In VCR Mode, switches between the signal coming from a VCR and a TV. CH+ and CH- (CHANNEL UP and CHANNEL DOWN): goes to the next highest or lowest channel number in the component channel list, respectively, except for DVDs. In DVDs, the CH+ and CH- keys refers to the NEXT/PREVIOUS chapter. CLEAR: removes the on-screen display to return to normal viewing. CODE SEARCH: use to program the remote. ENTER: use with Manual or Automatic Code Search method to accept code (See Code Lists enclosed). Also, some brands require you to press the ENTER key after you enter a channel number. In some menu systems, you must press the ENTER key to select a highlighted item. GO BACK: switches back to previous channel- operates the same as PREV CH, LAST CHANNEL or RECALL keys found on some brands of remote controls. GUIDE: brings up the on-screen TV program guide, if your TV is equipped with that feature. INFO: shows program information, if your component is equipped with this feature. Functions the same as a DISPLAY key. INPUT: selects the video inputs of your TV, if equipped with this feature. MENU•PROG: accesses DVD disc menus when playing a DVD disc. Accesses menu systems of some TVs, a few RCA brand VCRs and satellite receivers. (For more information, refer to the On-screen Menus section on page 12). MUTE: lowers the TV's volume to its minimum level. NAVIGATION KEYS & SELECT: used to move through onscreen menus and guides. Use the NAVIGATION keys to move the highlighted choice up, down, left or right. ON•OFF: turns component on and off. Note: Some RCA, GE and PROSCAN models require that you press the component key to turn the component on and the ON•OFF key to turn the component off. PIP: (Picture-in-Picture) and SWAP operate your TV's Picture-in-Picture, if your TV is equipped with this feature. RECORD: use with VCR to record programming. You must press the RECORD key twice to start recording. SLEEP: allows you to set a time to turn off your TV automatically. VOL: increases or decreases the TV or AUDIO system's volume level. 4