RCA RFR1504 English Manual - Page 9

• CONTROL PANEL - CHILD LOCK The CONTROL PANEL LOCK is designed to prevent any changes to the settings to the refrigerator. To enable the CHILD LOCK, press and hold the OK button for approximately 3 seconds, the CHILD LOCK icon will turn on. The control panel will be locked until unlocked at the control panel or there is a loss of power. To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the CHILD LOCK icon turns off and the control panel is working in normal operation mode. • CONTROL PANEL - STANDBY The CONTROL PANEL will do dark after approximately 5 minutes of no activity To activate the control panel, press and hold the OK button for approximately 3 seconds, the CONTROL PANEL AND CHILD LOCK icon will turn on. The control panel will be locked until unlocked at the control panel or there is a loss of power. To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the CHILD LOCK icon turns off and the control panel is working in normal operation mode. NOTE: • IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3 TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START. NOTE: WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE 110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER TEMPERATURES INSIDE THE REFRIGERATOR. FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º SET THE FREEZER TEMPERATURE CONTROL TO THE "COLDEST" SETTING. THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER THESE CONDITIONS. Ø Adjusting the Temperature in the Fresh Zone / Crisper To adjust the temperature in the Fresh Zone / Crisper, simply move the temperature control (located at the back of the unit just above the crisper) left to right. Temperature range is MAX to MIN. MAX is the coldest MIN is the Warmest 9