RCA RFRF1101 English Manual - Page 10
Troubeshooting
![]() |
View all RCA RFRF1101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Troubeshooting Non-fault instances ■ Frost on the out surface of the appliance High humidity in air caused this. Just wipe off frost. ■ Frost on the evaporator surface The evaporator working temperature is -6.8 F(-20℃). After working for a long time, the humidity in the air will change into frost on the evaporator. The frost thickness will gets bigger and bigger with time. Defrost according to Page 7. ■ High temperature on the door frame of the freezer compartment It is a special measure to prevent icing around the door. ■ High temperature at the lateral sides The condenser is inside the upper surface of the lateral sides. The condenser emits heat when the appliance works. In summer, the lateral temperature is around 122 F(50℃). ■ High temperature on the compressor When the appliance works, the temperature on the compressor is about 176 F(80 ℃). ■ Sounds like water current in the appliance The refrigerant goes through the refrigerant tube when the appliance works. ■ Sounds like clicking noise is heard in appliance There are shrinkage and expanding between inside body and the refrigerant tube. ■ The compressor can not start The voltage is too low. Recommend to fit one voltage regulator with power capacity of 500W or higher. ■ Sounds like buzz The compressor makes a buzzing sound when working. If the feet are not adjusted on vertical and stable position, there are shocks and noises. Adjust the feet on vertical and stable position. ■ Long time starting In summer, the ambient temperature is high. It is normal that the compressor starts frequently. 94
![](/manual_guide/products/rca-rfrf1101-english-manual-424cb05/10.png)