RCA RP4010 User Manual - Page 15

Alarm Settings Nap Mode For catnaps up to 2 hours without disturbing the regular alarm settings, the NAP function wakes you up after a short period of time. Simply: 1. Press NAP, the NAP indicator will flash. While the NAP indicator is flashing, press > to adjust nap time. The time range is from 10 minutes to 2 hours at 10 minutes interval. 2. Press NAP again to confirm, the NAP indicator will show on the display. 3. Press NAP once to show time left. Snooze This operation allows extra sleep time after EN the alarm is on. The alarm will be off by pressing SNOOZE until the snooze period is over. Snooze function can be used repeatedly up to 2 hours. After this, the alarm will turn off until the next alarm conditions are met. Set the "quiet" period as follows: 1. While pressing SNOOZE, press > to set the "quiet" period (the default time is 9 minutes) from 1 minute to 30 minutes. Release button, then the "quiet" period is set. Stopping the Nap Alarm When the NAP alarm sounds, you can press OFF to stop it. Cancelling the Nap Alarm Press and hold NAP for 5 seconds to cancel the nap setting. Tip: Only alarm tone can be selected in NAP mode. Weekend Cancel Wake settings are activated during Mon to Fri, but are cancelled on Sat and Sun. (Work only when wake setting is active) 1. Press and hold WEEKEND CANCEL for 5 seconds. 2. The WEEKEND CANCEL icon will ap- pear on the display. 3. Press and hold WEEKEND CANCEL for 5 seconds to disable the Weekend Cancel function. Adjusting the Dimmer Press > to adjust dimmer level. Default is the brightest. Note: You cannot adjust the dimmer in CD and radio mode. 13