RCA RP5605 User Manual - RP5605 - Page 1
RCA RP5605 - RP CD Clock Radio Manual
UPC - 044319751512
View all RCA RP5605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
v2.0 (EN/E) user manual manual de usuario RP5605 EN/E It is important to read this instruction prior to using your new product for the first time. Es importante leer este manual antes de usar por vez primera su equipo. FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTIONS Some of the following fit into your outlet, consult an has been damaged in any way, • Do not attempt to disassemble information may not apply to electrician for replacement of such as power-supply cord or the cabinet. This product your particular product; however, the obsolete outlet. plug is damaged, liquid has does not contain customer as with any electronic product, • Protect the power cord been spilled or objects have serviceable components. precautions should be observed from being walked on or fallen into the apparatus, the • IF YOUR PRODUCT OPERATES during handling and use. pinched particularly at plugs, apparatus has been exposed ON BATTERIES, adhere to the • Read these instructions. convenience receptacles, and to rain or moisture, does not following precautions: • Keep these instructions. the point where they exit from operate normally, or has been A. Any battery may leak • Heed all warnings. the apparatus. dropped. electrolyte if mixed with • Follow all instructions. • Only use attachments/ • ADDITIONAL SAFETY a different battery type, if • Do not use this apparatus near accessories specified by the INFORMATION inserted incorrectly, or if all water. manufacturer. • Apparatus shall not be exposed batteries are not replaced at • Clean only with dry cloth. • Use only with the cart, stand, to dripping or splashing and the same time. • Do not block any ventilation tripod, bracket, or table no objects filled with liquids, B. Any battery may leak openings. Install in accordance specified by the manufacturer, such as vases, shall be placed electrolyte or explode if with the manufacturer's or sold with the apparatus. on the apparatus. disposed of in fire or an instructions. When a cart is used, use • Always leave sufficient space attempt is made to charge a • Do not install near any heat caution when moving the cart/ around the product for battery not intended to be sources such as radiators, heat apparatus combination to ventilation. Do not place recharged. registers, stoves, or other avoid injury from tip-over. product in or on a bed, rug, C. Discard leaky batteries apparatus (including amplifiers) in a bookcase or cabinet that immediately. Leaking batteries that produce heat. • Do not defeat the safety may prevent air flow through can cause skin burns or ] vent openings. other personal injury. When purpose of the polarized • Do not place lighted candles, discarding batteries, be sure or grounding-type plug. A cigarettes, cigars, etc. on the to dispose of them in the polarized plug has two blades product. proper manner, according to with one wider than the • Unplug this apparatus during • Connect power cord only to your state/provincial and local other. A grounding type plug lightning storms or when AC power source as marked on regulations. has two blades and a third unused for long periods of the product. grounding prong. The wide time. • Care should be taken so that blade or the third prong is • Refer all servicing to qualified objects do not fall into the provided for your safety. If service personnel. Servicing is product. the provided plug does not required when the apparatus Before you begin SEE MARKING ON BOTTOM OF PRODUCT WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Technical information Product: CD/Clock Radio Brand: RCA Model: RP5605-A Power Supply: 120V ~ 60Hz Power Consumption: 13 Watts Plugging in for power AC OUTLET POWER SUPPLY: 120V~60Hz The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If the plug will not go into the outlet completely, turn the plug over and try to insert it the other way. If it still does not fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature. Power is fed to the unit even when it is not functioning. To cut the power supply off, the power cable must be unplugged. The descriptions and characteristics in this owner's manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice. The English version serves as the final reference on all product and operational details should any discrepancies arise in other languages. Battery back-up operation The power failure protection circuit will not operate unless battery is installed. No worry battery backup When the battery backup functions, the digital display will not light, however, the wake function still occurs during the power interruption if remaining battery power is adequate. Normal operation will resume after AC power is restored so you will not have to reset the time or wake. Install battery as follow: 1. Remove battery compartment door (located at the bottom of the radio) by applying thumb pressure to the tab on battery door and then lift the door out and off the cabinet. 2. Connect a 9-volt battery (not supplied) to the connector plug. 3. Replace the compartment door. Important Battery Precautions • Any battery may present a risk of fire, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture. • Non-rechargeable batteries, such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more. • If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak. • Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury. • Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations. Power failure indicator When AC power is interrupted (disconnected) for a short period of time, both time and alarm settings will change (unless battery is installed). After AC power is restored (reconnected), the Digital Display will blink to indicate that power was interrupted and you should readjust the time and alarm settings. For your records In the event that service should be required, you may need the model number and the serial number. In the space below, record the date and place of purchase and the serial number: Model No.: Date of Purchase: Place of Purchase: Serial No.: Service information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this user manual. Alkaline (NEDA 1604A/ IEC 6LR61) battery is recommended. Carbonzinc battery may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is approximately 8 hours (if radio or alarm are not operated) which should take care of short, nuisance-type AC power failures. To preserve battery life, the unit should remain plugged into an AC outlet. As the battery gets older, its voltage drops and memory may be lost. Be sure to replace the battery periodically. Battery should be removed if the unit will be stored for more than one month. Leaky battery can badly damage the clock radio. General controls Clock Radio Top view RADIO ON - turns on the radio; selects the radio from other modes OFF - turns off the unit; turns off the wake function and sleep mode / - sets clock or wake time; skips to previous or next CD track during CD playback - stops CD playback - turns on the unit from CD mode; pauses or resumes CD playback SLEEP - activates the Sleep function CLOCK SET - activates clock time setting mode WAKE TIME - activates wake time setting mode; checks current wake time WAKE MODE - activates wake function and changes wake mode SNOOZE - turns off the wake function temporarily; cancels the sleep function Right view Left view TUNING - selects radio frequency BAND AM/FM - selects radio band Setting clock 1. Press CLOCK SET once. The current clock time flashes on the display. + VOLUME - - adjusts volume 2. Press or to set the clock time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. AM or PM indicator also lights beside the time on the display. 3. When finished, wait for about 5 seconds or press CLOCK SET to exit clock setting mode. Switching on Press RADIO ON to turn on the radio. Switching band Slide the BAND/AM•FM switch on the right of the unit to select AM or FM band. Tuning radio Rotate the TUNING dial on the right of the unit to select radio frequency. Antennas AM Antenna - A built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception. Rotating the unit slightly may improve reception of distant AM stations. FM Antenna - The power cord acts as your FM antenna. The power cord picks up moderate to strong stations and eliminates the need for an external antenna in most strong signal areas. Be sure the power cord is stretched out to its full length. Do not coil or bunch the cord together. Changing position of the power cord may improve reception. Built-In AFC - The Built In Automatic Frequency Control (AFC) works only on FM. It helps reducing drift on FM reception and keeping the radio locked in on the FM station to which it is tuned. When tuning in FM stations, you may notice that the station you are tuning can be well-tuned on two or three nearby points on the dial. Always tune carefully at the loudest and clearest point. CD player Wake function Sleep function Listening to CD 1. Lift open the CD compartment door. 2. Insert a disc and close the door. 3. Press to select CD mode and start CD playback. • Press to pause playback and press again to resume. 4. Adjust volume to your desired level. 5. Press or to skip backward or forward a track. Press and hold to search through a track. 6. Press to stop playback. 7. Press RADIO ON to listen to the radio or OFF to turn off the unit. • If disc is paused for more than 5 minutes, the CD player will resume to stop mode automatically. • If disc is stopped in the CD mode for more than 30 minutes without further operations, the unit will turn off automatically. Setting wake time 1. Press WAKE TIME once. The current wake time flashes on the display. 2. Press or to set the wake time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. AM or PM indicator also lights beside the time on the display. 3. When finished, wait for about 5 seconds or press WAKE TIME to exit wake time setting mode. • The Wake to Alarm mode (read below) will be automatically activated whenever the wake time has been set. Selecting wake source 1. If your desired wake source is radio or CD: • Wake to Radio - select an AM or FM station (refer to "Radio"). • Wake to CD - insert a CD in the CD compartment. 2. Set a wake time (refer to "Setting wake time"). 3. Press WAKE MODE repeatedly to select a wake source. The indicator lights against the wake source icons on the right of the display to indicate the currently selected wake source: wake by alarm wake by radio wake by CD • Once the wake source is selected, the wake function will be activated at the set wake time. Checking wake time Press WAKE TIME to show the current wake time which flashes briefly on the display. Turning off the wake function Silence the wake function momentarily: • With SmartSnooze™, press SNOOZE, , , or to turn off the wake function temporarily for extra sleep time. Stop the wake function: Press OFF. The wake function will activate again on the following day at the same time. Cancel the wake function completely: Press WAKE MODE repeatedly until no indicator lights against the wake source icons. The set wake time will not be erased and can be used the next time when you switch on wake function again. • The wake function will activate again when the snooze period (9 minutes) is over. • The snooze period is fixed and cannot be changed. You can set the duration (up to 90 min) before the radio or CD player turns off automatically. 1. Press SLEEP repeatedly to select a duration (90, 80, 70, 60, 50, 40, 30, 20, 10min or OFF) before the radio or CD player turns off automatically. • The default sleep time is 60 minutes. • By default, the radio will be switched on once SLEEP is pressed. You may change to listen to the CD player by pressing if a disc is loaded. 2. To check the remaining duration before the unit turns off, press SLEEP once. 3. To cancel the sleep function, press SNOOZE or OFF. If you set Sleep function with low volume level before going to bed, we advise using Wake to Alarm mode. Limited warranty Limited Warranty (US) What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase. • The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: • Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product's warranty period. • Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required. How to make a warranty claim: • Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials. • Include evidence of purchase date such as the bill of sale. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to: Thomson Inc. Product Exchange Center 11721 B Alameda Avenue Socorro, Texas 79927 • Insure your shipment for loss or damage. Thomson accepts no liability in case of damage or loss en route to Thomson. • Pay any charges billed to you by the Exchange Center for service not covered by the warranty. • A new or refurbished unit will be shipped to you freight prepaid. What your warranty does not cover: • Customer instruction. (Your Owner's Manual provides information regarding operating Instructions and user controls. For additional information, ask your dealer.) • Installation and set-up service adjustments. • Batteries. • Damage from misuse or neglect. • Products which have been modified or incorporated into other products. • Products purchased or serviced outside the USA. • Acts of nature, such as but not limited to lightning damage. Product Registration: • Please complete and mail the Product registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. How state law relates to this warranty: • Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your product outside the USA: • This warranty does not apply. Contact your dealer for warranty information. Audiovox Electronics Corp 150 Marcus Blvd, Hauppauge, NY 11788 1-877-833-3491 ©2008 Trademark(s) ® Registered Marque(s) ® Deposée(s) Marca(s) ® Registrada(s) www.rcaaudiovideo.com