RCA RS2767i RS2767i Product Manual - Page 2
Limited warranty, CD program, Radio, Additional information, Troubleshooting tips, CD playback, iPod - 5 disc audio system
View all RCA RS2767i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
CD playback Please take care when loading or unloading discs in the disc drawer. Read below for details. Remove all discs from the disc drawer before moving or transporting the unit. Do not put discs in the trays of the disc drawer when they are still moving. Do not push or force the rotation of the disc trays. Always use the DISC SKIP button. Do not put discs in any unexposed disc trays. When an error occurs and the disc drawer does not close, empty all disc trays and try again. Loading discs 1. Press SOURCE repeatedly to select CD mode. 2. Press OPEN/CLOSE or to open the drawer. 3. Insert up to five discs with label face up. (Press DISC SKIP to rotate the disc carrier.) 4. Press OPEN/CLOSE or to close the drawer. Loaded disc position icon lights. Selecting discs Press DISC SKIP to skip discs. Playing discs Press to begin or pause playback, and STOP / to stop playback. Press / to select a specific track. Searching through a CD Press and hold / to search through a CD while it is playing. Shuffling play order Press SHUFFLE to turn on/off the playing of tracks in random order. Sampling tracks Press INTRO to play the first 10 seconds of each track on the current disc, all discs in the tray, or turn INTRO mode off. Play mode Press PLAY MODE to cycle between 1 Disc, All Discs, Repeat 1, Repeat 1 Disc, and Repeat All Discs. Press INFO repeatedly to view elapsed track time, track remain time and disc remain time during playback. You may also press PLAY MODE to select 1 disc or all discs before activating INTRO & SHUFFLE functions. CD program You can program the CD player to play up to any 32 tracks on the CDs in the tray. 1. While the CD player is stopped, press PROGRAM to enter program mode. The system displays the next available program number: "- P:01," with "- -" flashing, prompts you for the first track in the program list. 2. Press / to select a track (press DISC SKIP to select a track from a different disc). 3. Immediately press PROGRAM to assign the selected track to the program number. You are prompted for the next track in the program list. (In CD program mode, PROG icon will be lit.) Playing a program List While in PROGRAM mode, press . Displaying the program List 1. While the CD player is stopped, press PROGRAM to enter PROGRAM mode. 2. Press PROGRAM repeatedly to list each track assignment in the program list. Deleting program List While in PROGRAM mode, press and hold STOP / for 3 seconds. They unit displays the message "CLEAR". iPod playback Installing an iPod Dock Adapter 1. Choose the iPod Dock Adapter that fits your iPod. (iPod adaptor is not included) 2. Insert your iPod Dock Adapter into the dock until it sits firmly in place. Removing an iPod Dock Adapter Remove the iPod Dock Adapter as illustrated. Listening to your iPod Insert your iPod into the connector in the dock. Press iPod to select iPod mode. Press to begin or pause playback, and STOP/ to stop playback. Press / to select a specific song. Press and hold / to search through a song while it is playing. Press MENU to display iPod menu, press again to return to previous menu. Press PRESET to navigate iPod menu lists. Press SELECT to confirm iPod menu lists. iPod playback Your iPod will be charged automatically (until fully charged) once it is docked. To prevent interference to AM signal, please switch off the iPod while using Radio. Radio Press SOURCE or TUNER on the remote control to select TUNER. Selecting tuner band Press or press TUNER on the remote control to select between AM and FM radio bands. Tuning to a station Press / to select frequencies. Press and hold to start auto searching for the next available station. Preset and tune modes The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on. Presetting stations Manually setting presets 1. Press / to access the desired frequency. 2. Press PROGRAM button. The most recently accessed program location will be displayed. 3. If a different program location is preferred, press / to select to the desired preset number (1-32). 4. Press PROGRAM store the selected frequency at that preset. Auto preset programming (FM only) Press and hold AUTO PROG AND for 2 seconds to scan stations in the FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing and hold the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered. Using presets Press PRESET to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (e.g. P:01 is preset 1) Suppressing stereo signal Press FM ST. to select between FM mono and stereo for stereo FM stations. LINE IN / AUX Connect external audio sources to your audio system Press SOURCE on the unit repeatedly to select LINE IN or AUX mode. Or press LINE IN/AUX on the remote control to change to LINE IN mode from CD, TUNER or iPod mode, press LINE IN/AUX again to change to AUX mode. Suggest using Ø3.5mm LINE IN jack for mp3 player and AUX IN jacks for auxiliary equipment such as DVD, VCR or PC. Troubleshooting tips System will not turn on Check power cord for a secure connection. Unplug the unit for a moment, and then plug into power source again. Check the outlet by plugging in another device. No sound Increase the volume setting. Check connection to speakers. Check that you have selected the appropriate function: CD, TUNER, iPod, LINE IN/AUX. Make sure mute is off. Make sure headphones are not plugged in. Poor radio reception Check antenna connection. Move antenna. Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave, fluorescent lights. CD does not play Check that CD is in the tray. Check that CD label is facing up. Check that PAUSE mode is not on. Check that CD function is selected. Use CD lens cleaner. Clean the disc. Try another CD. CD sound skips Clean the disc. Check disc for warping, scratches, or other damage. Check if something is causing the system to vibrate. If so, move the system. Make sure the speakers are at least 3 feet away or on a different surface from the main unit. CD button will not respond, or does not change discs when you press DISC SKIP Switch to another function (TUNER, iPod, LINE IN/AUX) and then back to CD. Remote control does not work Check that the batteries are properly installed. Replace weak batteries. Check the system is plugged into power source. Point the remote directly at the system's front panel. Move closer to the system. Remove any obstacles between the remote and the system. iPod does not respond to the speaker system Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Make sure that your iPod is working properly before docking into the unit. Please refer to your iPod manual for details. Additional information Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD Player CAUTION! This system operates with a laser. It must be opened by only a qualified technician. Handling CDs Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. Do not affix labels or adhesive tapes to the label surfaces. Do not scratch or damage the label. CDs rotate at high speeds inside the player. Do not use damaged (cracked or warped) CDs Cleaning CDs Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface CD Lens Care When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner. Technical specifications Power supply: 120V~60Hz Dimensions ( H x W x D inches): Unit size - 12 x 11 x 17 Main Speaker - 12.1 x 9.5 x 9 Main unit weight: 13.6 lbs CD player: Response curve (+/2dB): 60Hz to 15 kHz Rating Plate: Look for it at the back of the set. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modification without prior notice. The English version serves as the final reference on all products and operational details should any discrepancies arise in other languages. Limited warranty AVC MULTIMEDIA ("AVC") makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. One Year Parts & Labor Warranty AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC's sole discretion. During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support Center at 1-877-252-6873, during the hours listed in the box on the right. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility. Packaging and Shipping Instruction When you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as designated by AVC. LIMITED WARRANTY Your Responsibility 1) You must retain the original sale receipt to provide proof of purchase. 2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada. 3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which has been altered or modified without authorization of AVC, or to products or parts thereof which have had the serial number removed or changed. Out of Warranty In the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at 1-877-252-6873 or www.RCAav.com Hours: Monday-Thursday: 9am-7pm, Friday: 9am-5pm, Saturday: 9am-NOON Eastern time. Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center. All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages. No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you. For more information on other products and services, please visit our web site at www.RCAav.com Important: Also keep your "Bill of Sale" as proof of purchase. Model no Product name Type of set Serial no Invoice no Date purchased Dealer name FOR SERVICE AND REPAIR, PLEASE VISIT www.RCAav.com Specifications and external appearance are subject to change without notice. 1522--2277667710-0-0228855R1 Printed in China