RCA RTD207 User Manual - RTD207 - Page 8

RTD206/207 EN 26/4/06 3:22 PM Page 8 Connections and Setup Magnetic shielding Speakers placed less than two feet from the TV set must be magnetically shielded in order to prevent picture distortion. Front and center speakers provided with this unit are magnetically shielded to protect your TV set. EN Note: It is not recommended to place the rear speakers and subwoofer near the TV set. Front speaker placement Follow the suggestions for speaker placement below to get the best results. Alignment Align the center speaker evenly with (A) or slightly behind (B) (the left and right speakers), but not ahead of them. Courtesy Dolby Laboratories A B Courtesy Dolby Laboratories Angle Place the left and right speakers to form a 45-degree angle with your favorite viewing position to duplicate the soundtrack mixer's perspective. Height The mid- and high-frequency drivers of the three front speakers should be as close as possible to the same height. This often requires placing the center speaker directly on top (A) or beneath (B) the TV set. Preferred surround placement Location If possible, place surround speakers to either side of the listening area, not behind it. Height If space permits, install surround speakers 2-3 feet above viewers. This helps to minimize localization effects. Aiming Aim surround speakers straight across the room, not down at viewers, to help create a more open, spacious surround sound field. Alternative Surround Placement Courtesy Dolby Laboratories Rear wall If rear wall mounting is the only choice, aim the speakers at each other (A), towards the front (B) or towards the sidewalls (C, D). Experiment with placement until sounds seem to surround you, rather than come from behind you. Courtesy Dolby Laboratories 6 Illustrations contained in this document are for representation only.