Rane AD22S AD22S Data Sheet - Page 4

AD22S AUDIO DELAY Rear Panel Architectural Specifications The digital audio delay unit shall be a single rack space, balanced two-input, two-output configuration. The delay adjustment range shall be from 2.00 to 999.99 ms, adjustable in 0.01 ms increments via increment / decrement pushbuttons, in 10 µs or 1 ms intervals. Additionally, the values shall be selectable in terms of distance in feet or meters, as well as in frames for all common NTSC and PAL / SECAM frame rates. A 40x2 backlit character LCD shall indicate current delay settings and provide cursor controls for selecting and setting the delay values and configuration parameters, including temperature, frame rate, and stored memory values. Bypass status, signal / overload presence and mode of operation shall be indicated with individual indicators. Terminals on the rear panel shall allow remote disabling of the front panel controls and bypass switches. Additional terminals shall provide access for remote switches to recall memory settings. The inputs and outputs shall be active balanced with XLR connectors, and include switchable fail-safe output relays on each channel that automatically enable in the event of power failure. RFI filters shall be provided. The unit shall be capable of operation by means of its own built-in universal power supply operating at 100-240 VAC and meet CE requirements. The unit shall be UL and cUL listed. The unit shall be a Rane Corporation AD22S. References 1. Shaw, N. "Digital Delays, Parts One, Two & Three," Sound & Communications, vol. 39, nos. 3, 5 & 10, (March, May, & October 1993). 2. Bohn, D. "Environmental Effects on the Speed of Sound,"J. Audio Eng. Soc., vol. 36, pp. 223-231 (April 1988). ©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 TEL 425-355-6000 FAX 425-347-7757 WEB rane.com Data Sheet-4 All features & specifications subject to change without notice. 1-2014