Rane HC6S HC6S Manual - Page 5

FRONT PANEL DESCRIPTION 1 4 6 2 8 0 10 PHONES SIG LEVEL 2 4 6 2 8 0 10 PHONES SIG LEVEL 3 4 6 2 8 0 10 PHONES SIG LEVEL 4 4 6 2 8 0 10 PHONES SIG LEVEL 5 4 6 2 8 0 10 PHONES SIG LEVEL 6 4 6 2 8 0 10 PHONES SIG LEVEL MONO MASTER 4 6 2 8 STEREO 0 10 LEVEL 1 2 3 45 POWER 6 HC6S HEADPHONE CONSOLE 1 Front panel PHONES Output jacks are in parallel with the rear panel stereo OUT jacks. Use them to monitor any of the six channels for level or mix adjustments, or for easy access when the HC6S is rack mounted. Plugging into these front jacks does not disengage the rear Outputs. 2 SIGnal present indicators light (green) with any input signal above -20 dBu. See OPERATING INSTRUCTIONS (on page Manual-4) for complete details. 3 Individual LEVEL controls set the volume for each set of headphones, regardless of whether they are driven from the MASTER INPUTS or from the direct stereo INs. When using the front and rear panel headphone jacks together, this control varies the level of each headphone simultaneously. 4 MONO / STEREO switch converts the MASTER INPUTS from stereo to mono so that a single input cable drives both sides of the headphones. 5 MASTER LEVEL sets the volume simultaneously to all headphones driven from the MASTER INPUTS. This does not alter the volume on any headphones driven from the direct stereo INs. 6 POWER switch. Your basic, straightforward power switch. When the yellow LED is lit, the HC6S is ready to go. Manual-2