Rane MS1S MS1S Mic Stage Manual - Page 10
Block Diagram, Architectural Specifications, dB adjustment range. Power - mic stage
View all Rane MS1S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Block Diagram +48V PHANTOM POWER SIGNAL / OVERLOAD MIC INPUT 2 3 1 RFI FILTER GAIN 12-60 dB +6 dB INVERT LINE 2 LEVEL 3 OUT 1 Architectural Specifications The microphone preamplifier shall be a single channel stand-alone unit with a removable IEC power cord. The unit shall accept voltages from 100 to 240 VAC. The input and output shall be fitted with XLR connectors. A polarity inverting switch shall be included. Phantom power of no less than 48 volts shall be provided in compliance with IEC 60268-15 and be controlled by a slide switch with an LED indicator. A gain control shall be provided with 1866 dB adjustment range. Power, system signal and overload indicators shall be provided. High current cross-coupled active output line driver shall be standard, as well as input RFI filter protection. The unit shall be a Rane MS1S Microphone Stage. All features & specifications subject to change without notice. 10