Rane RAD6 All RAD Specifications are included in the HAL All Specifications D - Page 9

NEW! EXP2x Dante Expander, About Audinate, Features

Page 9 highlights

HAL Hardware INPUTS SIGNAL ACTIVE 12345678 9 10 11 12 13 14 15 16 OUTPUTS SIGNAL ACTIVE SIGNAL ACTIVE 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SIGNAL ACTIVE LOCK CONNECT LINK EXPANSION BUS LOCATE POWER STATUS EXP2x DANTE EXPANSION EXP2X 100-240 V 50/60 Hz 18 WATTS RANE CORPORATION MADE IN U.S.A. EXPANSION BUS LINK PRIMARY SECONDARY SECONDARY MODE COM LINK COM LINK SWITCH REDUNDANT NEW! EXP2x Dante Expander The EXP2x is an input/output expander that enables the HAL1x to send 32 and receive 32 audio channels from other Dante™ devices. The EXP2x ships Fall 2014. Use the EXP2x to interface a HAL1x System with a Dante network. Applications abound in houses of worship, installed sound, performing arts venues, education and corporate environments. The EXP2x allows connecting a Dante network between facilities or multiple independent HAL1x systems. Built-in sample rate converters support 48 kHz or 96 kHz sample rates on the Dante network. Daisychain up to 16 EXP2x Expanders to a single HAL1x to max-out at 512 x 512 channels on both a single cable on the Dante network and the HAL1x's Expansion Bus. The HAL1x is capable of 32 Expanders on its bus, so the EXP2x can be combined with other Expanders. For example, use 16 EXP2x Expanders with 512 input and 512 output channels, and then put on another 16 EXP3x Expanders for more outputs. The EXP2x is equipped with a Secondary Dante port for either Redundant Mode or Switch Mode. Use Dante Controller software for all network audio and EXP2x Brooklyn II card management. Front panel and Halogen software indicators for Dante connection, network status, flow active, and audio signal present aid troubleshooting. Dante Controller provides all network setup, monitoring, control, diagnostics and troubleshooting beyond compare; while Halogen reads, but does not edit the Dante setup, simplifying which software to use and eliminating conflict. Dante provides a no-hassle, self-configuring network with ultra low latency, while providing a true plug-and-play digital audio network using standard Internet Protocols on existing infrastructure - without requiring a dedicated network. The technology is built on global networking standards, making signal distribution more flexible, cost-effective and user-friendly and has been used at some of the largest live events and sophisticated installations worldwide. HAL1x System A HAL1x System B 12345678 OVERLOAD SIGNAL MIC / LINE INPUTS 12345678 OVERLOAD SIGNAL LINE OUTPUTS 12345678 ENABLED DIGITAL REMOTES IN 1 OUT OVERLOAD 1212 SIGNAL 1212 ENABLED IN 2 OUT IN 3 OUT 1212 1212 1212 1212 REMOTE AUDIO DEVICES IN 4 OUT 1212 1212 COMM LINK ETHERNET LINK EXPANSION BUS FAULT LOCATE POWER STATUS REMOTE AUDIO DEVICES IN 1 OUT OVERLOAD 1212 SIGNAL 1212 ENABLED IN 2 OUT 1212 1212 IN 3 OUT 1212 1212 IN 4 OUT 1212 1212 IN 5 OUT 1212 1212 IN 6 OUT 1212 1212 IN 7 OUT 1212 1212 IN 8 OUT 1212 1212 LINK EXPANSION BUS LOCATE POWER STATUS INPUTS SIGNAL ACTIVE 12345678 9 10 11 12 13 14 15 16 OUTPUTS SIGNAL ACTIVE SIGNAL ACTIVE 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SIGNAL ACTIVE LOCK CONNECT LINK EXPANSION BUS LOCATE POWER STATUS REMOTE AUDIO DEVICES IN 1 OUT OVERLOAD 1212 SIGNAL 1212 ENABLED IN 2 OUT 1212 1212 IN 3 OUT 1212 1212 IN 4 OUT 1212 1212 IN 5 OUT 1212 1212 IN 6 OUT 1212 1212 IN 7 OUT 1212 1212 IN 8 OUT 1212 1212 LINK EXPANSION BUS LOCATE POWER STATUS HAL1x HEURISTIC AUDIO LABORATORY EXP1x REMOTE AUDIO EXPANSION EXP2x DANTE EXPANSION EXP1x REMOTE AUDIO EXPANSION HAL1x HAL1x Managed Switch ACME MANAGED SWITCH EXP2x EXP2x 12345678 OVERLOAD SIGNAL MIC / LINE INPUTS 12345678 OVERLOAD SIGNAL LINE OUTPUTS 12345678 ENABLED DIGITAL REMOTES IN 1 OUT OVERLOAD 1212 SIGNAL 1212 ENABLED IN 2 OUT IN 3 OUT 1212 1212 1212 1212 REMOTE AUDIO DEVICES IN 4 OUT 1212 1212 COMM LINK ETHERNET LINK EXPANSION BUS FAULT LOCATE POWER STATUS 12345678 OVERLOAD SIGNAL LINE OUTPUTS OVERLOAD SIGNAL ENABLED IN 1 OUT IN 2 OUT REMOTE AUDIO DEVICES 123456 DIGITAL REMOTES EXPANSION BUS STATUS INPUTS SIGNAL ACTIVE 12345678 9 10 11 12 13 14 15 16 OUTPUTS SIGNAL ACTIVE SIGNAL ACTIVE 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 SIGNAL ACTIVE LOCK CONNECT LINK EXPANSION BUS LOCATE POWER STATUS 12345678 OVERLOAD SIGNAL LINE OUTPUTS OVERLOAD SIGNAL ENABLED IN 1 OUT IN 2 OUT REMOTE AUDIO DEVICES 123456 DIGITAL REMOTES EXPANSION BUS STATUS HAL1x HEURISTIC AUDIO LABORATORY EXP3x ZONE EXPANSION EXP2x DANTE EXPANSION EXP3x ZONE EXPANSION MICROPHONE SIG / OL POWER COMM MICROPHONE SIG / OL AUDIO RX AUDIO TX RAD1 PUSH • SELECT DR1 MICROPHONE SIG / OL POWER COMM LINE INPUT SIG / OL AUDIO RX AUDIO TX RAD2 SCROLL PUSH • SELECT DR2 SCROLL PUSH • SELECT DR3 INPUT PLAY OUTPUT RECORD USB AUDIO AUDIO RX AUDIO TX POWER COMM RAD27 LINE INPUT SIG / OL POWER COMM LINE INPUT SIG / OL AUDIO RX AUDIO TX RAD3 LINE OUTPUT SIG / OL POWER COMM LINE OUTPUT SIG / OL AUDIO RX AUDIO TX RAD4 Features ƒƒ Supports 44.1, 48, 88.2 or 96 kHz Dante network sample rates. ƒƒ Up to 32 transmit channels and up to 32 receive channels (at any supported sample rate - that's right, even at 96 kHz). ƒƒ 32 bi-directional channels of high-quality sample rate conversion. ƒƒ Switch Mode and Redundant Mode for the Secondary Dante network port. ƒƒ Clear signal presence and fault status indication in Halogen Software and on the EXP2x front panel. ƒƒ Discoverable and configurable using Dante Controller software. About Audinate Audinate revolutionizes AV systems to customers to thrive in a networked world. Audinate's patented Dante media networking technology has been adopted by the leading manufacturers in the professional audio/visual industry. Dante is used extensively for live performance events, commercial installation, broadcast, recording and production, and communications systems. Audinate offices are located in US, United Kingdom and Australia. Visit www.audinate.com for the latest news and information on the company. Dante is Digital Media Networking Perfected. Dante is a trademark of Audinate Pty Ltd. Audinate is a registered trademark of Audinate Pty Ltd. This device has not been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained. AES3 INPUT LOCK POWER COMM AES3 OUTPUT AUDIO RX AUDIO TX RAD5 LINE INPUT SIG / OL POWER COMM LINE OUTPUT SIG / OL AUDIO RX AUDIO TX RAD6 MICROPHONE SIG / OL POWER COMM LINE INPUT SIG / OL AUDIO RX AUDIO TX RAD7 PUSH • SELECT DR1 MICROPHONE SIG / OL POWER COMM LINE OUTPUT SIG / OL AUDIO RX AUDIO TX RAD8 MICROPHONE SIG / OL POWER COMM LINE OUTPUT SIG / OL AUDIO RX AUDIO TX RAD9 MICROPHONE SIG / OL POWER COMM MICROPHONE SIG / OL AUDIO RX AUDIO TX RAD12 LINE OUTPUT SIG / OL LINE OUTPUT SIG / OL Data Sheet - 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Data Sheet - 9
HAL Hardware
STATUS
EXPANSION
BUS
LINK
LOCATE
POWER
LOCK
CONNECT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
INPUTS
OUTPUTS
SIGNAL
ACTIVE
SIGNAL
ACTIVE
SIGNAL
ACTIVE
SIGNAL
ACTIVE
EXP2x
DANTE
EXPANSION
EXPANSION BUS
EXP2
X
100-240 V
RANE CORPORATION
50/60 Hz 18 WATTS
MADE IN U.S.A.
LINK
LINK
COM
LINK
COM
REDUNDANT
SWITCH
SECONDARY
SECONDARY MODE
PRIMARY
NEW!
EXP2x Dante Expander
°e EXP2x is an input/output expander that enables the HAL1x
to send 32 and receive 32 audio channels from other Dante™
devices. °e EXP2x ships Fall 2014.
Use the EXP2x to interface a HAL1x System with a Dante net-
work. Applications abound in houses of worship, installed sound,
performing arts venues, education and corporate environments.
°e EXP2x allows connecting a Dante network between facilities
or multiple independent HAL1x systems.
Built-in sample rate converters support 48 kHz or 96 kHz
sample rates on the Dante network.
Daisychain up to 16 EXP2x Expanders to a single HAL1x
to max-out at 512 x 512 channels on both a single cable on the
Dante network and the HAL1x’s Expansion Bus. °e HAL1x is
capable of 32 Expanders on its bus, so the EXP2x can be com-
bined with other Expanders. For example, use 16 EXP2x Expand-
ers with 512 input and 512 output channels, and then put on
another 16 EXP3x Expanders for more outputs.
°e EXP2x is equipped with a Secondary Dante port for
either Redundant Mode or Switch Mode. Use Dante Control-
ler software for all network audio and EXP2x Brooklyn II card
management.
Front panel and Halogen software indicators for Dante con-
nection, network status, flow active, and audio signal present aid
troubleshooting. Dante Controller provides all network setup,
monitoring, control, diagnostics and troubleshooting beyond
compare; while Halogen reads, but does not edit the Dante setup,
simplifying which software to use and eliminating conflict.
Dante provides a no-hassle, self-configuring network with ultra
low latency, while providing a true plug-and-play digital audio
network using standard Internet Protocols on existing infrastruc-
ture — without requiring a dedicated network. °e technology is
built on global networking standards, making signal distribution
more flexible, cost-effective and user-friendly and has been used
at some of the largest live events and sophisticated installations
worldwide.
About Audinate
Audinate revolutionizes AV systems to customers to thrive in a
networked world. Audinate’s patented Dante media networking
technology has been adopted by the leading manufacturers in
the professional audio/visual industry. Dante is used extensively
for live performance events, commercial installation, broadcast,
recording and production, and communications systems.
Audinate offices are located in US, United Kingdom and
Australia. Visit www.audinate.com for the latest news and
information on the company. Dante is Digital Media Networking
Perfected.
Dante is a trademark of Audinate Pty Ltd.
Audinate is a registered trademark of Audinate Pty Ltd.
°is device has not been authorized as required by the rules of the Federal
Communications Commission. °is device is not, and may not be, offered for sale or
lease, or sold or leased, until authorization is obtained.
Features
²
Supports 44.1, 48, 88.2 or 96 kHz Dante network sample
rates.
²
Up to 32 transmit channels and up to 32 receive channels
(at any supported sample rate - that’s right, even at 96 kHz).
²
32 bi-directional channels of high-quality sample rate
conversion.
²
Switch Mode and Redundant Mode for the Secondary
Dante network port.
²
Clear signal presence and fault status indication in Halogen
Software and on the EXP2x front panel.
²
Discoverable and configurable using Dante Controller
software.
HAL1x System B
HAL1x System A
Managed Switch
EXP2x
HAL1x
EXP2x
HAL1x