RedMax BC280 Owners Manual - Page 2

Warning - trimmer

Page 2 highlights

CONTENTS Contents CONTENTS Contents 2 Note the following before starting . . . . 2 KEY TO SYMBOLS Symbols 3 SAFETY INSTRUCTIONS Personal protective equipment 4 Machine's safety equipment 4 Cutting equipment 6 Checking, maintaining and servicing the machine's safety equipment . . . . . 6 General safety precautions 8 Starting 9 Fuel safety 9 Transporting and storage 9 General working instructions 9 Basic safety rules 9 Basic working techniques 10 WHAT IS WHAT? What is what 12 ASSEMBLY Fitting the loop handle 13 Fitting the trimmer guard and trimmer head 13 FUEL HANDLING Fuel 14 Fueling 15 STARTING AND STOPPING Check before starting 16 Starting and stopping 16 MAINTENANCE Carburetor 17 Muffler 18 Spark plug 18 Air filter 19 Bevel gear 19 Maintenance schedule 19 Trimmer head line loading instructions . . 20 TECHNICAL DATA Technical data 21 LIMITED WARRANTY STATEMENT 22 EMISSION CONTROL WARRANTY STATEMENT 25 Note the following before starting: RedMax has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice. Long--term exposure to noise can result in permanent hearing impairment. Always use approved hearing protection. Maintenance, replacement, or repair of the emission control devices and system may be performed by any off-road engine repair establishment or individual. The Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. Category C = 50 hours, B= 125 hours, and A = 300 hours. For reference, please fill out the following information that will be needed for future servicing of your trimmer: Model Number: Serial Number: Purchase Date: Purchased From: WARNING: A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator's manual. WARNING: Under no circum- stances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non- authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non- authorized accessories or replacement parts. WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 115391527 Rev. 4 5/15/12 English--- 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

English --- 2
115391527
Rev. 4
5/15/12
CONTENTS
Contents
CONTENTS
Contents
2
........................
Note the following before starting
2
....
KEY TO SYMBOLS
Symbols
3
.........................
SAFETY INSTRUCTIONS
Personal protective equipment
4
......
Machine’s safety equipment
4
........
Cutting equipment
6
.................
Checking, maintaining and servicing
the machine’s safety equipment
6
.....
General safety precautions
8
.........
Starting
9
.........................
Fuel safety
9
.......................
Transporting and storage
9
...........
General working instructions
9
........
Basic safety rules
9
.................
Basic working techniques
10
..........
WHAT IS WHAT?
What is what?
12
....................
ASSEMBLY
Fitting the loop handle
13
.............
Fitting the trimmer guard and
trimmer head
13
.....................
FUEL HANDLING
Fuel
14
............................
Fueling
15
..........................
STARTING AND STOPPING
Check before starting
16
..............
Starting and stopping
16
..............
MAINTENANCE
Carburetor
17
.......................
Muffler
18
..........................
Spark plug
18
.......................
Air filter
19
..........................
Bevel gear
19
.......................
Maintenance schedule
19
.............
Trimmer head line loading instructions
20
..
TECHNICAL DATA
Technical data
21
....................
LIMITED WARRANTY STATEMENT
22
EMISSION CONTROL
WARRANTY STATEMENT
25
.........
Note the following before
starting:
RedMax has a policy of continuous product
development and therefore reserves the right
to modify the design and appearance of prod-
ucts without prior notice. Long--term exposure
to noise can result in permanent hearing
impairment. Always use approved hearing
protection. Maintenance, replacement, or repair
of the emission control devices and system
may be performed by any off-road engine re-
pair establishment or individual.
The Emissions Compliance Period referred
to on the Emissions Compliance label indi-
cates the number of operating hours for
which the engine has been shown to meet
Federal emissions requirements.
Category C = 50 hours, B= 125 hours, and
A = 300 hours.
For reference, please fill out the following
information that will be needed for future
servicing of your trimmer:
Model Number:
Serial Number:
Purchase Date:
Purchased From:
WARNING:
A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
WARNING:
Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non -authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
Your warranty may not cover
damage or liability caused by the
use of non -authorized accesso-
ries or replacement parts.
WARNING
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.