RedMax EBZ5150RH Owners Manual - Page 15

9. Maintenance ■ IGNITION COIL AIR GAP INSPECTION F26 • If the gap is out of standard or when installing the coil or rotor, adjust the air gap between the ignition coil and the iron core of the rotor. Air Gap: 0.40mm (0.35 ~ 0.45mm) 0.016" (0.014 ~ 0.017") (1) Rotor (2) Ignition coil ■ SHOULDER STRAP • If the shoulder strap is damaged it may F27 break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap with new one. • Pass the upper end of the strap through the hanger, making the FLAPPED SIDE OUTSIDE. • Put the end of the strap through the ring on the strap, and then push the ring toward the hanger as close as possible. (1) Ring WARNING The flap on the end of the strap works as a stopper. Never install the strap with the flapped side inside, or the unit may fall from the operator, which could result in injury to the operator and/or damage to the unit. IMPORTANT Do not apply liquid type screw lock glue on screws or bolts used to fix plastics components. Adherence of this type of glue may cause cracks on plastics and end up with the breakage. EBZ5150/RH U S US-15