RedMax G5300 Owners Manual - Page 36
Cooling system, Dust Free centrifugal cleaning, Winter use
View all RedMax G5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
MAINTENANCE Cooling system To keep the working temperature as low as possible the machine is equipped with a cooling system. The cooling system consists of: 1 Air intake on the starter. 2 Air guide plate. 3 Fins on the flywheel. 4 Cooling fins on the cylinder. 5 Cylinder cover (directs cold air over the cylinder). 5 Winter use Running problems can occur when using the machine in the cold and snowy conditions caused by: • Too low engine temperature. • Icing of the air filter and carburetor. Special measures are therefore often required: • Preheat the intake air to the carburetor by using the heat from the cylinder. • Partly mask the air inlet on the starter to increase the working temperature of the engine. Temperature 0°C (32°F) or colder: 4 The cylinder cover is designed so it can be adjusted for running in cold weather. Twist the winter flap so that 3 preheated air from the cylinder can pass into the carburetor space preventing icing of the air filter, etc. 2 1 Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine overheating which causes damage to the piston and cylinder. Note! The cooling system on a chain saw with catalytic converter must be cleaned daily. This is particularly important on chain saws with catalytic converters, because the higher exhaust temperature requires efficient cooling of the engine and the catalytic converter unit. "Dust Free" centrifugal cleaning Centrifugal cleaning means the following: All air to the carburetor passes through the starter. Dirt and dust is pushed out by the cooling fan. IMPORTANT! Any maintenance other than that described in this manual must be carried out by your servicing dealer (retailer). IMPORTANT! In order to maintain operation of the centrifugal cleaning system it must be regularly maintained. Clean the air intake to the starter, the fins on the flywheel, the space around the flywheel, inlet pipe and carburetor compartment. 36 - English