Reebok 100 Zx Elliptical English Manual - Page 10

10. Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw 10 (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66). 24 Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button 31 106 Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button 74 66 103 103 66 Screw (106) as shown. 110 Attach the Right Link Arm (31) in the same way. 30 106 103 66 32 11. Plug the power cord (not shown) into the power socket (not shown) at the rear of the elliptical exerciser. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser. 10