Reebok 1000 Zx Elliptical English Manual - Page 15

5. Measure your heart rate if desired. 6. Turn on the fan if desired. If there are sheets of clear Contacts plastic on the metal contacts on the handgrip pulse sensor, remove the plas- tic. In addition, make sure that your hands are clean. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the contacts tightly. When your pulse is detected, your heart rate will be shown in the display. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. To turn on the fan at high speed, press the Fan button. To turn on the fan at low speed, press the Fan button a second time. To turn off the fan, press the Fan button again. Note: If the pedals have not moved for about thirty seconds, the fan will automatically turn off. Pivot the fan louvers above the display upward or downward to direct the airflow from the fan. 7. When you are finished exercising, the console will turn off automatically. If the pedals have not moved for several seconds, a series of tones will sound and the console will pause. If the pedals have not moved for about five minutes, the console will turn off and the display will be reset. If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts tightly. For optimal performance, clean the metal contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. 15