Reebok 95 Axb Bench English Manual - Page 6

ASSEMBLY Make Assembly Easier Everything in this manual is designed to ensure that the weight bench can be assembled successfully by almost anyone. Set aside plenty of time so that assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • To hire an authorized service technician to assemble the weight bench, call 1-800-445-2480. • Assembly requires two persons. • Make sure that there is enough clearance to walk around the weight bench as you assemble it. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • Tighten all parts as you assemble them, unless instructed to do otherwise. • Assembly requires only the included tools. Assembly may be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before beginning assembly, make sure 1 that you have read and understand the information in the box above. Orient the Front Stabilizer (2) and the Front Leg (25) as shown. Attach the Front Stabilizer to the Front Leg with two M8 x 63mm Bolts (16), two M8 Washers (20), and two M8 Locknuts (24). Do not tighten the Locknuts yet. Next, attach the Front Leg (25) to the Frame (1) with two M8 x 63mm Bolts (16), two M8 Washers (20), and two M8 Locknuts (24). Do not tighten the Locknuts yet. 16 20 1 16 20 2 24 25 24 Holes 6