Reebok R 6.90 Treadmill English Manual - Page 8

3. Identify the Right Upright (77) and the Right Upright Spacer (88), which are marked with "Right" stickers. Insert the Wire Harness (87) through the Right Upright Spacer as shown. Then, set the Right Upright Spacer on the Base (84). Have a second person hold the Right Upright (77) near the Base (84). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Wire Harness (87). Then, pull the other end of the wire tie until the Wire Harness is routed completely through the Right Upright. 3 87 Wire Tie 77 87 Wire Tie 4. Hold a Bolt Spacer (82) inside the lower end of the Right Upright (77). Insert a 3/8" x 4" Bolt (4) 4 with a 3/8" Star Washer (8) into the Right Upright and the Bolt Spacer. Repeat this step 77 with a second Bolt Spacer (82), 3/8" x 4" Bolt (4), and 3/8" Star Washer (8). Hold the Right Upright (77) against the Right Upright Spacer (88). Be careful not to pinch the Wire Harness (87). Tighten the 3/8" x 4" Bolts (4) until the heads of the Bolts touch the Right Upright; do not fully tighten the Bolts yet. Press a Base Cap (80) into the Base (84). 77 87 88 84 4 8 87 82 82 88 80 84 5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the 5 A B Frame (52) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Wheel (85) to the Base (84) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (7). Do not overtighten the Nut; the Wheel must turn freely. 6 52 84 85 7 8