Reebok Rb310 Bike Canadian English Manual - Page 7
Upper and Main Wire Harnesses 42, 43. Insert
View all Reebok Rb310 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. The Console (4) requires four "D" batteries (not included); alkaline batteries are recommended. IMPORTANT: If the exercise cycle has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become damaged. Remove the battery cover from the back of the Console. Next, insert four batteries into the battery compartment; make sure that the batteries are oriented as shown by the diagram inside the battery compartment. Then, reattach the battery cover. 5 Batteries 4 Batteries Battery Cover 6. While another person holds the Console (4) near the Upright (2), connect the console wire harnesses to the Upper and Main Wire Harnesses (42, 43). Insert the excess wire downward into the Upright. Attach the Console (4) to the Upright (2) with four M4 x 16mm Round Head Screws (80). Be careful to avoid pinching the Wire Harnesses (42, 43). 6 4 Avoid pinching and damaging the wires. 42 80 80 43 2 Console Wire Harnesses 7. Attach the Seat (9) and the Backrest Bracket (3) to the Seat Bracket (11) with four M6 x 42mm Button 7 9 Screws (81) and four M6 Washers (44) as shown. Start all four Button Screws before you tighten any of them. 11 3 44 44 81 81 7