Reebok Trainer Rx 1.5 Bike English Manual - Page 9

8. Identify the Right Handlebar (48), which is marked with an "R" sticker, and orient it as 8 shown. Make sure that the hexagonal holes are in the indicated location. While a second person holds the Right Handlebar (48) near the Upright (3), tie the indicated wire tie to the Right Pulse Wire (64). Then, pull the other end of the wire tie upward out of the top of the Upright. Tip: Avoid pinching the wire. Slide the Right Handlebar (48) onto the Upright (3). Attach the Right Handlebar (48) with two M8 x 38mm Button Bolts (53) and two M8 Locknuts (37). Make sure that the Locknuts are in the hexagonal holes. Attach the Left Handlebar (47) in the same way. 47 66 3 Avoid pinching the wire Wire Tie 53 64 48 37 Hexagonal Holes 9. The Console (6) can use four D batteries (not included); alkaline batteries are recommended. 9 Do not use old and new batteries together or alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screws and the bat- tery covers, insert batteries into the battery compartments, and then reattach the battery covers. Make sure to orient the batteries as shown by the diagrams inside the battery compartments. To purchase an optional AC adapter, call the telephone number on the front cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screws Batteries 6 Battery Covers Batteries 9