Ricoh 1000SF Operating Instructions - Page 22

12 3 - Copy SP 1000SF Copy Your machine has the function to make one or more copies. You can also setup several parameters in order to make copies at your will. Simple copy In this case, the default parameters are applied. 1 Place the document to be copied in the automatic document feeder, face printed on the top. or Place the document to be copied face down on the glass, respecting the indications around the glass. 2 Press the button twice. The copy is made using the default parameters. ECO mode copy The ECO mode enables you to reduce the amount of toner consumed on the page so as to save your printing costs. When the ECO mode is used, the toner consumption is reduced and the print density becomes lighter. 1 Place the document to be copied in the automatic document feeder, printed face on the top. or Place the document to be copied face down on the glass, respecting the indications around the glass. 2 Press the button. 3 Press the ECO button. Sophisticated copy The sophisticated copy allows to do custom setups for the current copy. Note You can start copy by pressing button at any time in below steps. 1 Place the document to be copied in the automatic document feeder, face printed on the top. or Place the document to be copied face down on the glass, respecting the indications around the glass. Note After step 1, you can directly enter the number of copies with the numerical keypad and press the OK button to validate. Then refer to step 4. 2 Press the button. 3 Enter the number of copies that you want and confirm with the OK button. 4 Choose the paper tray AUTOMATIC or MANUAL with the buttons or , then confirm with the OK button. 5 Choose with the buttons or the printing option (see examples below) depending on the copy mode that you want: - Combined mode (document feeder): 1 Page onto 1, 2 Pages onto 1, or 4 Pages onto 1. - Poster mode (flat-bed scanner): 1 Page to 1, 1 Page to 4 or 1 page to 9. Confirm with the OK button. COMBINED Copy mode Analyzed sheets Output POSTER Copy mode Analyzed sheets Output 1 1 page onto 1 1 A 1 page to 1 A 1 2 pages onto 1 2 A 1 page to 4 1 2 4 pages onto 1 1 2 34 3 4 A 1 page to 9 6 Adjust the desired zoom level, from 25% TO 400% with the buttons or , confirm with the OK button (only available in 1 Page to 1 copy mode). 7 Adjust the desired origin values with the digital keyboard buttons or then confirm with the OK button. 8 Choose the resolution depending on the printing quality that you want DRAFT, AUTO, QUALITY TEXT or PHOTO with the buttons or , then confirm with the OK button. 9 Adjust the contrast level with the buttons or , then confirm with the OK button. 10 Adjust the desired brightness level with the buttons or , then confirm with the OK button. 11 Choose the paper type NORMAL, THICK with the buttons or , then confirm with the OK button. Special setup for the copy Setups done through this menu become the device default setups after you confirm. When the quality of the printing is not Important satisfying, you can proceed to a calibration with MENU 80. - 19 -