Ricoh 2075 Operating Instructions - Page 122
Problem, Causes, Solutions
View all Ricoh 2075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Troubleshooting Problem Causes Solutions The stamp position is wrong. The paper orientation is wrong. Check the paper orientation and stamp position. When using Combine, parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of your originals and copy paper. When you specify a reproduction ratio using Manual Paper Select mode, make sure the ratio matches your originals and the copy paper. Note ❒ Select the correct reproduction ratio before using Combine mode. Order of copies is not cor- You placed originals in in- When placing a stack of originals in rect. correct order. the ADF, the last page should be at 4 the bottom. If you place an original on the expo- sure glass, start with the first page to be copied. When using Duplex, copy is made Top/Bottom even though Left/Right is selected, or copy is made Left/Right even though Top/Bottom is selected. You placed originals in the wrong direction. Place originals in the correct orientation. Paper does not output during printing with stapling. If you stop printing while using the staple function, papers not stapled during printing may be left in the staple unit. Press the {Reset} key and cancel copy settings, including stapling. ❖ Connect Copy Problem You cannot staple, punch or Z-fold. You get different copy results from the main and sub-machines. Causes Solutions The main and sub-machines are not installed with the same options. Press [ Copy. ] to cancel Connect The Copy Quality setting Set the Copy Quantity. differ on the two machines. 112