Ricoh 3045 Printer Reference - Page 127
Punching Precautions, General Set, tings Guide
![]() |
View all Ricoh 3045 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Printing with the Finisher Punching Precautions Limitation ❒ Punching cannot be done when paper is fed from the bypass tray. Note ❒ If you cannot make punch settings even with the optional 2 Tray Finisher installed, options may not be set correctly in the printer driver. Correct option settings in the printer driver. For details, see the printer driver Help. ❒ When duplex printing is selected, adjust punch positions according to binding orientation. ❒ Be sure to set the punch position the same as the staple position when using it with the staple function. ❒ Be sure to set paper size and orientation in the printer driver when punching. 4 • Depending on the software you are using, print settings may not be enabled and the printed result may not be as expected. ❒ Punch will be canceled under the following conditions: • When a paper size that cannot be punched is selected. For information about paper sizes that can be punched, see "Specifications", General Settings Guide. • If positions other than those fixed for punching are specified. • If there are inconsistencies between the orientation in duplex mode and the punch position. • When feeding paper from the bypass tray. • When the punch receptacle has become full and Auto Continue is set, printing will continue without punching after the message appears. 121
![](/manual_guide/products/ricoh-3045-printer-reference-bf0db60/127.png)