Ricoh 4100NL Software User Guide - Page 252
Connected DHCP Server<DHCP serveraddress>., Established SPX Connection with PServer
UPC - 026649066368
View all Ricoh 4100NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
6. Monitoring and Configuring the Printer Message Problem and solutions Client password rejected The client's password was rejected. Check the client password. Client tls certificate rejected The client's TLS certificate was rejected. Check the certificate. Connected DHCP Server(). The IP address was successfully received from the DHCP server. Could not attach to FileServer (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server configuration. Could not attach to PServer 6 Current Interface Speed: xxxMbps (In the remote printermode) Connection to the print server has not been established. The print server has refused the connection. Check the print server configuration. Speed of the network (10Mbps, 100 Mbps, or 1Gbps). Current IP address Current IPv4 address. Current IPX address Current IPX address DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start. The DHCPCD service (dhcp client service) has started. Duplicate IP=(from). The same IP address (IPv4, or IPv6 address) was used. Each IP address (IPv4, or IPv6 address) must be unique. Check the address of the device indicated in [MAC address]. Established SPX Connection with PServer, (In the remote printer mode) Connection to the print (RPSocket=, connID=) 250