Ricoh 4110N Operating Instructions - Page 41
see Ethernet Configuration.
UPC - 026649028038
View all Ricoh 4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Attaching Gigabit Ethernet Board Type A 6. Fasten the Gigabit Ethernet board to the controller board with two screws. 2 AUB239S Check the Gigabit Ethernet board is connected firmly to the controller board. • Use a coin or similar object if the screws do not turn easily. • After finishing installation, check the Gigabit ethernet board is installed properly: print the configuration page from the [List/Test Print] menu. If it is installed properly, you will see "Gigabit Ethernet" for "Device Connection" on the configuration page. • If the Gigabit ethernet board is not installed properly, reinstall it following this procedure. If you cannot install it properly even after attempting reinstallation, contact your sales or service representative. • You need to make settings with the control panel before using the Gigabit Ethernet board. For details, see "Ethernet Configuration". • "Printing the Test Page", Quick Installation Guide. • p.53 "Ethernet Configuration" 39