Ricoh 5100N User's Guide - Page 49
LSU Motor Error, Open/Close Door
UPC - 026649028502
View all Ricoh 5100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Message Load [Size] In [Tray] Load Manual Press Cont Key Low Heat Error Cycle Power LSU Motor Error Cycle Power MP Tray Paper Empty OPC is Cleaning Open Heat Error Cycle Power Out-Bin Full Over Heat Error Cycle Power Paper Exit Jam 1 Open/Close Door Meaning Suggested solutions The paper size specified in the printer properties does not match the paper you are loading. Load the correct paper in the tray. The multi-purpose tray is empty in manual feed mode. Load a sheet of print media and press OK. You need to press OK each page to be printed. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. There is no paper in the multi-purpose tray. Load paper in the multi-purpose tray. See page 5.6. Your printer is printing a cleaning sheet now. Please wait a few minutes. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. The output tray is full. It can hold up to 250 sheets of plain paper. Once the paper is removed from the output tray, the printer resumes printing. There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. Paper has jammed before reaching to the exit sensor. Clear the jam. See page 9.3. Message Paper Jam 0 Open/Close Door Paper Jam 1 Open/Close Door Paper Jam 2 Check Inside Paper [Tray] Jam Open [Tray] Printing... Ready Self Diagnostic LSU Self Diagnostic Temperature Sleeping... [Tray] Cassette Out [Tray] Paper Empty Warming Up Please Wait... Meaning Paper has jammed in the feeding area of the tray. Paper has jammed in the fuser area. Suggested solutions Clear the jam. See page 9.2. Clear the jam. See page 9.3. There are toner powders on a feed sensor. Clean a feed sensor. see page 8.1. Paper has jammed in the paper exit area. Clear the jam. See page 9.4. Paper has jammed in the displayed optional tray. Clear the jam. See page 9.2. The printer is printing jobs. Complete your printing. The printer is on-line Use your printer. and ready to print. The LSU (Laser Scanning Unit) in your printer is checking some problems detected. Please wait a few minutes. The engine in your printer is checking some problems detected. Please wait a few minutes. The printer is in power save mode. When data is received, it switches to on-line automatically. The displayed tray is Close the tray until it open. locks into place. There is no paper in Load paper in the the tray. tray. See page 5.5. Your printer is warming up now. Please wait a few minutes. 9.7