Ricoh 9100DN Operating Instructions - Page 41
Configuration, Ethernet Configuration
UPC - 026649026164
View all Ricoh 9100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4. Configuration Ethernet Configuration Make the following network settings according to the network interface you are using. You can use SmartDeviceMonitor for Admin or a Web browser to make IP address-related settings in a TCP/IP-capable environment. The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Setting Name Value 4 • DHCP: On IPv4 Settings • IPv4 Address: 011.022.033.044 • Subnet Mask: 000.000.000.000 • Gateway Address: 000.000.000.000 IPv6 Settings Stateless sett.: Active Frame Type (NW) Auto Select Active Protocol • IPv4: Active • IPv6: Not Active • NetWare: Active • SMB: Active • AppleTalk: Active Ethernet Speed Auto Select LAN Type Ethernet • Configure the printer for the network using the control panel. • If DHCP is in use, the IP address, subnet mask, and gateway address are all set automatically. • Make this setting only when it is necessary. See Software Guide. 1. Press the [Menu] key. 39