Ricoh Aficio MP 1600 Scanner Reference - Page 93
Preparation for Using the Network TWAIN Scanner, System Settings, Effective Protocol
View all Ricoh Aficio MP 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
When Using as a TWAIN Scanner Preparation for Using the Network TWAIN Scanner This section explains the preparation and settings for using the network TWAIN scanner function. Important ❒ To use the network TWAIN scanner, a TWAIN-compliant application, such as DeskTopBinder, must be installed on the client computer. DeskTopBinder Lite is on the supplied CD-ROM. For details about installing DeskTopBinder Lite, see "Installing DeskTopBinder Lite from Provided CD-ROM". A Connect the machine to the network. Connect the machine to the network using an Ethernet cable or wireless LAN (IEEE 802.11b). 4 B Make the necessary network settings in [System Settings]. If you have connected the machine to the network using an Ethernet cable, make the following settings. For details, see General Settings Guide. • Specify the machine's IPv4 address and subnet mask. • In [Effective Protocol], enable [IPv4]. C Install the TWAIN driver on a client computer. For details about installing the TWAIN driver, see "Installing TWAIN Driver from Provided CD-ROM". Note ❒ To connect the machine to the network using a wireless LAN (IEEE 802.11b), an extended wireless LAN board is required respectively. For details, see Network Guide. ❒ Items to set up in [System Settings] vary depending on the network environment. For more information about network settings, see General Settings Guide. ❒ For more information about [System Settings], see General Settings Guide. Reference p.88 "Installing TWAIN Driver from Provided CD-ROM" p.73 "Installing DeskTopBinder Lite from Provided CD-ROM" 87