Ricoh Aficio MP 2852 Security Target - Page 92
Software Verification Function, Fax Line Separation Function
View all Ricoh Aficio MP 2852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Page 91 of 91 7.9 Software Verification Function The Software Verification Function is to verify the integrity of the executable codes of the MFP Control Software and FCU Control Software and confirm that these codes can be trusted. FPT_TST.1 The TOE verifies software at the TOE start-up. The TOE verifies the integrity of the MFP Control Software first by using the hash and then by checking the certificate. If the hash does not match its original value or the certificate verification fails, the TOE displays the error message and becomes unavailable. If the hash matches its original value and the certificate is verified, the TOE becomes available. The TOE also verifies the integrity of the audit log data files. The TOE outputs the information used for integrity verification so that the integrity of the FCU Control Software can be verified. To check the integrity of the FCU Control Software, the information the TOE outputs will be compared with the information described in the guidance documents, so that the integrity of the FCU Control Software can be verified. 7.10 Fax Line Separation Function The Fax Line Separation Function is to receive only faxes as input information from telephone lines so that unauthorised intrusion from telephone lines can be prevented. This function also can be used to prohibit transmissions of received faxes so that unauthorised intrusion from telephone lines to the LAN can be prevented. FPT_FDI_EXP.1 The TOE receives fax data only as input information from telephone lines. If any communication that does not comply with the fax protocol is performed, the line is disconnected. Since the TOE is set to prohibit forwarding of received fax data during installation, received fax data will not be forwarded. Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.