Ricoh Aficio MP 5500 S/P Network Guide - Page 80
set, from Routing Table
View all Ricoh Aficio MP 5500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Monitoring and Configuring the Printer ❖ Setting IPv6 Default Gateway msh> route add6 default gateway ❖ Adding a specified IPv6 destination to Routing Table msh> route add6 {destina- 2 tion} prefixlen gateway • Specify the IPv6 address to des- tination and gateway. ❖ Deleting a specified IPv6 destination from Routing Table msh> route delete6 {destination} prefixlen • Specify the IPv6 address to destination and gateway. ❖ Display information about a specified IPv6 route information msh> route get6 {destination} • Specify the IPv6 address to destination and gateway. ❖ Enabling/disabling a specified IPv6 destination msh> route active6 {destination} prefixlen {on | off} ❖ Route initialization msh> route flush Note ❒ The maximum number of IPv4 routing tables is 16. ❒ The maximum number of IPv6 routing tables is 2. ❒ Set a gateway address when communicating with devices on an external network. ❒ The same gateway address is shared by all interfaces. ❒ "Prefixlen" is a number between 1 72 and 128. set Use the "set" command to set the protocol information display "active" or "inactive". ❖ View settings The following command displays protocol information (active/inactive). msh> set ipv4 msh> set ipv6 msh> set appletalk msh> set netware msh> set smb msh> set scsiprint • scsiprint is available when the optional IEEE 1394 interface board is installed. msh> set ip1394 • ip1394 is available when the optional IEEE 1394 interface board is installed. msh> set protocol • When protocol is specified, information about TCP/IP, AppleTalk, Netware, SCSI print, IPv4 over 1394, PictBridge and SMB appears. msh> set lpr msh> set lpr6 msh> set ftp msh> set ftp6 msh> set rsh msh> set rsh6 msh> set diprint msh> set diprint6 msh> set web msh> set snmp msh> set ssl msh> set ssl6