Ricoh Aficio MP 5500 S/P Troubleshooting - Page 34
Troubleshooting When Using the Copy Function
View all Ricoh Aficio MP 5500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting When Using the Copy Function Problem Cause Solution Parts of images are not copied. The original is not set cor- Set originals correctly. See "Placing rectly. Originals", Copy/Document Server Reference. Parts of images are not copied. The correct paper size is Select the proper paper size. not selected. 2 Images appear only par- The paper is damp. tially. Use paper that has been stored in the recommended temperature and hu- midity condition. See "Copy Paper", About This Machine. Black lines appear. The exposure glass or scanning glass is dirty. Clean them. See p.106 "Maintaining Your Machine". White lines appear. White lines appear. The exposure glass or scanning glass is dirty. Clean them. See p.106 "Maintaining Your Machine". When D is blinking, ton- Add toner. See p.77 "Adding Toner". er is beginning to run out. Copies are blank. The original is not set cor- When using the exposure glass, face the rectly. originals down. When using the ADF, face them up. A moiré pattern is produced on copies. Your original has a dot pattern image or many lines. Place the original on the exposure glass at a slight angle. Black spots appear on the copy of a photographic print. Because of high humidity, the photographic print has stuck to the exposure glass. Place the print on the exposure glass in either of the following ways: • Place an OHP transparency on the exposure glass, and then place the print on top of the OHP transparency. • Place the print on the exposure glass, and then place two or three sheets of white paper on top of it. Leave the exposure glass cover or auto-document feeder (ADF) open when copying. 28