Ricoh Aficio MP 5500 S/P General Settings Guide - Page 14
Connecting to the Ethernet Interface, Make sure the main power switch on the machine is Off.
View all Ricoh Aficio MP 5500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connecting the Machine Connecting to the Ethernet Interface Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface. 1 Important ❒ If the main power switch is turned "On", turn it "Off". A A ferrite core for the Ethernet cable is supplied with this machine. The Ethernet cable loop should be about 15 cm (5.9 inch) (1) from the machine end of the cable. AEV047S B Make sure the main power switch on the machine is "Off". C Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port. AMM007S D Connect the other end of the Ethernet cable to a network connection device such as a hub. 6
Connecting the Machine
6
1
Connecting to the Ethernet Interface
Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface.
Important
❒
If the main power switch is turned "On", turn it "Off".
A
A ferrite core for the Ethernet cable is supplied with this machine. The
Ethernet cable loop should be about 15 cm (5.9 inch) (1) from the machine
end of the cable.
B
Make sure the main power switch on the machine is "Off".
C
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
D
Connect the other end of the Ethernet cable to a network connection device
such as a hub.
AEV047S
AMM007S