Ricoh Aficio MP 6000 Troubleshooting - Page 29
Connect Copy, User Tools/Counter, Interrupt
View all Ricoh Aficio MP 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Messages Displayed When Using the Copy/Document Server Function ❖ Connect Copy Message Cannot connect to the sub-machine. Check the status of the sub-machine. Cause • The L indicator is lit. • The hard disk of the sub-machine is malfunctioning. Solution Press [Exit] on the main machine and follow the instructions on the display. Cannot print from the sub-machine. Check the status of the sub-machine. A paper misfeed has occurred on the sub-machine, or toner or other supplies need to be replenished. Follow the instructions displayed. For details, see p.99 "Adding Toner", p.105 "Removing Jammed Paper", p.118 "Removing Jammed Staples". If the sub-machine's display indicates that a cover is open, follow the instructions displayed. Cannot print from the sub-machine. Check the status of the sub-machine. The sub-machine's User Tools menu is open. Press the {User Tools/Counter} key to close the User Tools menu. Sub-machine is in The sub-machine is in In- Press the {Interrupt} key on the sub-ma- Interrupt mode. terrupt mode. chine to cancel Interrupt mode. Sub-machine does Paper type or tray setnot have the same tings on the two mapaper setting(s). chines do not match. Make the same settings on both machines. The Cover Sheet setting(s) of the sub-machine is different from the main machine. Cover settings on the two machines do not match. Make the same settings on both machines. The Slip Sheet Slip Sheet settings on the setting(s) of the two machines do not sub-machine is match. different from the main machine. Make the same settings on both machines. The Designation Sheet setting(s) of sub-machine is different from main machine. Designation Sheet settings on the two machines do not match. Make the same settings on both machines. Sub-machine paper settings must be the same to use this tray. Paper tray settings on the two machines do not match. Make the same settings on both machines. No stamp data in the sub-machine. Stamp data on the submachine has been deleted. Reprogram the stamp on the sub-machine. 2 21