Ricoh Aficio MP 7000 S/P Network Guide - Page 79
passwd, prnlog, route, Setting the Default IPv4 Gateway
View all Ricoh Aficio MP 7000 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Remote Maintenance by telnet passwd Use the "passwd" command to change the remote maintenance password. ❖ Changing the Password msh> passwd • Enter the current password. • Enter the new password. • Renter the new password to confirm it. ❖ Changing the Password of the administrators using the Supervisor msh> passwd {Administrator ID} • Enter the new password. • Renter the new password to confirm it. Note ❒ Be sure not to forget or lose the password. ❒ The password can be entered using up to 32 alphanumeric characters. Passwords are case-sensitive. For example, "R" is not the same as "r". prnlog Use the "prnlog" command to obtain printer log information. ❖ Print logs display msh> prnlog • Display previous print jobs. msh> prnlog "ID Number" • Specify the ID number of the displayed print log information to display additional details about a print job. Reference p.86 "Getting Printer Information over the Network". route Use the "route" command to view and control the routing table. ❖ Specified route information display msh> route get "destination" 2 • Specify the IPv4 address to destination. "0.0.0.0" cannot be specified as destination address. ❖ Enabling/disabling specified IPv4 destination msh> route active {host|net} "destination" {on | off} • You can turn the specified destination on or off. Host becomes the default setting. ❖ Adding IPv4 Routing Table msh> route add {host|net} "destination" "gateway" • Adds a host or network route to "destination", and a gateway address to "gateway" in the table. • Specify the IPv4 address to destination and gateway. • Host becomes the default setting. ❖ Setting the Default IPv4 Gateway msh> route add default "gateway" ❖ Deleting specified IPv4 destination from Routing Table msh> route delete {host|net} "destination" • Host becomes the default setting. • IPv4 address of destination can be specified. 71