Ricoh Aficio MP 7000 Network Guide - Page 86
spoolsw, sprint, ssdp, Job Spool setting
View all Ricoh Aficio MP 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Monitoring and Configuring the Printer spoolsw sprint Use the "spoolsw" command to view Use the "sprint" command to view and configure Job Spool settings. and configure IEEE 1394 (SCSI print) You can only specify diprint, trap, lpr, settings. 2 ipp, ftp, sftp, and smb(TCP/IP) protocol. ❖ View settings IEEE 1394 (SCSI print) settings are • The "spoolsw" command for con- displayed. figuring Job Spool settings is avail- able only when the optional hard msh> sprint disk is installed. ❖ Bidirectional configuration for IEEE ❖ View settings The Job Spool setting appears. msh> spoolsw 1394 (SCSI print) Use this setting to set IEEE 1394 (SCSI print) bidirectional. The default is "on". ❖ Job Spool setting msh> sprint bidi {on | off} msh> spoolsw spool {on|off} Note ❒ Specify "on" to enable Job Spool, or "off" to disable it. ssdp Use the "ssdp" command to view and configure SSDP settings. ❖ Resetting Job spool setting msh> spoolsw clear job {on|off} • When the printer power is cut during job spooling, this determines whether to reprint the spooled job. ❖ View settings msh> ssdp ❖ Setting effective time msh> ssdp profile {1801- 86400} The default is 10800 seconds. ❖ Protocol configuration ❖ Advertise packet TTL settings msh> spoolsw diprint {on|off} msh> spoolsw lpr {on|off} msh> spoolsw ipp {on|off} msh> spoolsw smb {on|off} msh> spoolsw ftp {on|off} msh> spoolsw sftp {on|off} • You can specify the settings for diprint, lpr, ipp, ftp, sftp, and smb. msh> ssdp ttl {1-255} The default is 4. 78