Ricoh Aficio MP C2500 EFI General Settings Guide - Page 147
Program / Change / Delete Scan Size, Facsimile Features, Scan Settings, Program Size 1, Clear
View all Ricoh Aficio MP C2500 EFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Program / Change / Delete Scan Size Program / Change / Delete Scan Size Program frequently used scan sizes. Important ❒ When programming or changing a scan size, it is recommended that you make a record of the new size. When you select a scan size to scan a custom size original, two custom sizes are available (Program Size 1 and Program Size 2). Use these functions to program a custom size in advance. The procedure is the same for programming and changing. You can program up to two sizes. Specify a horizontal length from 128 to 1200 mm, or from 5.5 to 47 inches. 4 A Press [Facsimile Features]. B Press [Scan Settings ]. C Press [Program / Change / Delete Scan Size]. D Select [Program Size 1] or [Program Size 2]. E Enter a horizontal size using the number keys. Each time you press [mm] or [inch], the units switch between "mm" and "inch". If you enter a length and press [mm] or [inch], the length is converted automatically according to the unit (fractions are rounded off). For example, when you enter {2}, {2}, and {0} in millimeters and change to "inch", the length "8.7 inch" is shown on the display. If you press [mm] or [inch] again, "221 mm" is displayed. If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again. To cancel a scan size, press [Cancel]. 139