Ricoh Aficio MP C3000 Network Guide - Page 89
wiconfig, View settings, View IEEE 802.11b settings, Configuration
View all Ricoh Aficio MP C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
wiconfig Use the "wiconfig" command to make settings for IEEE 802.11b. ❖ View settings msh> wiconfig ❖ View IEEE 802.11b settings msh> wiconfig cardinfo • If IEEE 802.11b is not working correctly, its information is not displayed. ❖ Configuration msh> wiconfig "parameter" Parameter mode [ap|adhoc|802.11adhoc] ssid "IDvalue" Value configured You can set the infrastructure mode(ap) , the 802.11 Adhoc mode (802.11adhoc), or the ad hoc mode (adhoc). The default is ad hoc mode. You can make settings for the SSID in the infrastructure mode. Usable characters are ASCII 0x200x7e (32 bytes). An SSID value is set automatically to the nearest access point if no setting is made. If no setting is made for the 802.11 ad hoc mode, the samevalue as for the infrastructure mode or an ASSID value is automatically set. The default is blank. Remote Maintenance by telnet Parameter Value configured channel frequency "channelno." You can enable or disable the WEP function. To enable the WEP function, specify [on]; to disable it, specify [off]. To start the WEP function, enter the 2 correct WEP key. The default is "11". key [ "key value" ] val [1|2|3|4] You can specify the WEP key when entering in hexadecimal. With a 64-bit WEP, you can use 10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimals. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key, the WEP specified by key phrase is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. Put "0x"on the front of WEP key. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. 81