Ricoh Aficio MP C3500 EFI Fax Reference - Page 52
Start, Clear Modes, Specify the destination, and then press
View all Ricoh Aficio MP C3500 EFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Transmission E Specify the destination, and then press the {Start} key. Note ❒ This stamp indicates that the original has been successfully stored in memory 1 for Memory Transmission, or successfully sent by Immediate Transmission. ❒ When the stamp starts getting lighter, replace the cartridge. ❒ If a multi-page feed or paper jam occurs, the originals are not sent properly and not stamped. If you find a page that is not stamped, send only that page again. ❒ You can have the machine select the Stamp function right after the power is turned on or the {Clear Modes} key is pressed. See "Registering a priority function using a program". ❒ You can program one of the Quick Operation keys with operations for this function. Using the Quick Operation key allows you to omit step B. ❒ A paper jam during Parallel Memory Transmission may cause the transmission to fail even if stamping is performed. ❒ You cannot turn the Stamp function on or off while an original is being scanned. Reference p.264 "Registering a priority function using a program" "Facsimile Features", General Settings Guide "Adding paper, Toner and Staples", Troubleshooting 42