Ricoh Aficio MP C3500 General Settings Guide - Page 65
Timer Settings - error codes
View all Ricoh Aficio MP C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Timer Settings Timer Settings This section describes the user tools in the Timer Settings menu under System Settings. Default settings are shown in bold type. ❖ Auto Off Timer After a specified period has passed, following job completion, the machine auto- 2 matically turns off, in order to conserve energy. This function is called "Auto Off". The machine status after the Auto Off operation is referred to as "Off mode", or "Sleep mode". For the Auto Off Timer, specify the time to elapse before Auto Off. The default setting is 60 min.. The time can be set from 1 to 240 minutes, using the number keys. Auto Off may not work when error messages appear. ❖ Energy Saver Timer Set the amount of time the machine waits before switching to lower-power mode after copying has finished or the last operation is performed. The time can be set from 1 to 240 minutes, using the number keys. The default setting is 15 min.. ❖ Panel Off Timer Set the amount of time the machine waits before switching the panel off after copying has finished or the last operation is performed. The warm up time for making a copy from standby mode is 3 seconds for Panel off Level 1 and 15 seconds for Panel off Level 2. Enter a time interval between 10 seconds and 240 minutes, using the number keys. The default setting is 60 second(s). ❖ System Auto Reset Timer The System Reset setting automatically switches the screen to that of the function set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. • On • Off The time can be set from 10 to 999 seconds, using the number keys The default setting is 60 second(s). ❖ Copier/Document Server Auto Reset Timer (copier/Document Server) Specifies the time to elapse before copier and Document Server modes reset. • On • Off If [Off] is selected, the machine does not automatically switch to the user code entry screen. The time can be set from 10 to 999 seconds, using the number keys. The default setting is 60 second(s). 57