Ricoh Aficio MP W3600 Operating Instructions [Folding Finisher] - Page 20

Preparation Before Using the Folding Finisher Paper This section lists the paper types and sizes that are supported by the Folding Finisher, 1 and paper types that are not supported. Supported Paper Types and Sizes The following tables show supported types and sizes of paper for each fold type. Fan fold Paper type Paper size Paper weight Plain Paper, Recycled • Width Paper All paper sizes supported by the printer. 64.0 to 81.4 g/m2 (17.1 to 21.7 lb) • Length Online mode: 12.6 to 236.3 inches Offline mode: 11.7 to 236.3 inches Regardless of the length of the paper, the number of folded surfaces cannot exceed 30 (i.e., 29 folds) . Note ❒ Do not fold Translucent Paper or OHP transparencies. Doing so may cause malfunctions. ❒ Paper is output from the Paper Exit. The exit tray can hold only one sheet of paper at a time. When paper is output, retrieve the paper immediately. Operating the machine without retrieving the paper results in paper jam. ❒ When paper is wrinkled, turn the Anti-humidity Heater switch to "aON". Non-fold Paper type Paper size All paper types sup- All paper sizes supported by the printer. ported by the printer. Paper weight 64.0 to 81.4 g/m2 (17.1 to 21.7 lb) Note ❒ Paper is usually output from the Non-folded Paper Exit. However, paper that is 7.9 to 12.6 inches in length is output from the Paper Exit. Up to 10 sheets of paper can be stacked in the Non-Folded Paper Exit Tray (when using D size paper). ❒ For paper size notations, see "Notations for Standard Paper Sizes". Reference p.15 "Notations for Standard Paper Sizes" 14