Ricoh Aficio SP 5200S User Guide - Page 16

Handling the machine's interior, When moving the machine after use - toner

Page 16 highlights

3. Safety Information for This Machine • Before installing or removing options, always disconnect the power cord plugs from the wall outlet and allow time for the main unit to fully cool. Failing to take these precautions could result in burns. • Do not look into the lamp. It can damage your eyes. 3 • Protect the machine from dampness or wet weather, such as rain and snow. • For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer. • Wait at least one hour after power off before replacing parts. Not allowing the machine to cool may result in burns. • Type 1 weighs approximately 45 kg (99.2 lb.), type 2 weighs approximately 47 kg (103.7 lb.), and type 3 weighs approximately 52 kg (114.7 lb.). When moving the machine, use the inset grips on both sides, and lift slowly. The machine will break or cause injury if dropped. • When moving the machine after use, do not take out the print cartridge to prevent toner spill inside the machine. • Do not connect the Ethernet port of the machine to a network that may supply excess voltage, such as a telephone line. Doing so may result in fire or electric shock. Handling the machine's interior This section explains safety precautions about handling the machine's interior. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Before installing or removing options, always disconnect the power cord plugs from the wall
outlet and allow time for the main unit to fully cool. Failing to take these precautions could result
in burns.
Do not look into the lamp. It can damage your eyes.
Protect the machine from dampness or wet weather, such as rain and snow.
For environmental reasons, do not dispose of the machine or expended supply waste at
household waste collection points. Disposal can take place at an authorized dealer.
Wait at least one hour after power off before replacing parts. Not allowing the machine to
cool may result in burns.
Type 1 weighs approximately 45 kg (99.2 lb.), type 2 weighs approximately 47 kg (103.7
lb.), and type 3 weighs approximately 52 kg (114.7 lb.). When moving the machine, use the
inset grips on both sides, and lift slowly. The machine will break or cause injury if dropped.
When moving the machine after use, do not take out the print cartridge to prevent toner spill
inside the machine.
Do not connect the Ethernet port of the machine to a network that may supply excess voltage,
such as a telephone line. Doing so may result in fire or electric shock.
Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
3. Safety Information for This Machine
14
3