Ricoh CL7200DT2 Maintenance Manual - Page 46
Remove the photoconductor unit you want to replace. Move the green
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Replacing Consumables and Maintenance Kit D Loosen the two screws fastening the inner cover, using the provided screwdriver. You cannot remove these two screws. E Lift the inner cover until it clicks into place and holds. The photoconductor units are installed as shown. Starting from the upper left, the units are attached in the order of black (K), yellow (Y), cyan (C), and magenta (M). F Remove the photoconductor unit you want to replace. Move the green hook slowly to the right, as shown. The green hook is located on the upper right of the photoconductor unit. 46
Replacing Consumables and Maintenance Kit
46
D
Loosen the two screws fastening the inner cover, using the provided
screwdriver.
You cannot remove these two screws.
E
Lift the inner cover until it clicks into place and holds.
The photoconductor units are installed as shown. Starting from the upper left,
the units are attached in the order of black (K), yellow (Y), cyan (C), and ma-
genta (M).
F
Remove the photoconductor unit you want to replace. Move the green
hook slowly to the right, as shown. The green hook is located on the up-
per right of the photoconductor unit.