Ricoh Epson Stylus Pro 9700 User Guide - Page 21
Chap 1-Setting Up the Printer, Unpacking and Assembling the Printer
View all Ricoh Epson Stylus Pro 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
21 Chapter 1: Setting Up the Printer This chapter includes the following information: • Unpacking and assembling the Pro 7700 and Pro 9700 • Connecting the power cord • Installing ink • Connecting to your computer and a network • Installing the printer software for Windows or Macintosh • Updating the printer firmware • Configuring the printer for a network Unpacking and Assembling the Printer WARNING: Four people are required to unpack and set up the printer. Note: When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, moisture, or dust. Also avoid locations near potential sources of electromagnetic interference, such as loudspeakers, cordless phones, TVs, or air conditioners. Follow these steps to assemble your printer and its stand. Before you begin, make sure you have sufficient space to set up and use the printer-at least 12 inches (305 mm) on all sides in addition to the dimensions shown: • 53.4 × 35.6 inches (1356 × 903 mm) for the Epson Stylus Pro 7700 • 73.4 × 52 inches (1864 × 1318 mm) for the Epson Stylus Pro 9700 21