Ricoh IM C2500 User Guide - Page 290

9. Troubleshooting Message Cause Solution and reference "Output tray has been changed." The destination to deliver the output paper was changed because of the paper size limitation of the output destination. Specify the correct destination to deliver the output paper. "Paper size and type are mismatched. Select another tray from the following and press [Continue]. To cancel job, press [Job Reset]. Paper size and type can also be changed in User Tools." The paper tray loaded with paper of the size or type specified in the printer driver is not available. • To proceed with printing after changing the paper setting, select a tray and press [Continue]. When Staple, Punch, Fold, Cover Sheet, Slip Sheet, Chaptering, or Designate is specified, or when Duplex printing is specified on a paper tray that does not support the function, printing cannot be performed. When Sort is specified, only one copy of the document is printed. • To proceed with printing on the specified paper, load the paper and then check that the paper size and type are correctly specified in the following setting items. • Settings screen type: Standard [Settings] [Tray/Paper Settings] [Paper Size/Paper Type] • Settings screen type: Classic [Settings] [Tray Paper Settings] tab page 185 "Loading Paper into the Paper Tray" "Parallel I/F board has a problem." An error has occurred in the parallel interface. Turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. page 11 "Turning On and Off the Power" If the message persists even after you have turned the power off and then on, consider repairing the machine. "Printer font error." There is a problem in the font file of the machine. Consider repairing the machine. 288