Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 22
Defining the InfoPrint Color 130 Plus to InfoPrint Manager, Important, PSF TCP/IP-attached
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
v Dedicated Gigabit Ethernet connection v F80 AIX system with: - Two 450 Mhz CPUs and four 500 Mhz CPUs - Six GB RAM - Six 18 GB Serial Storage Architecture (SSA) - Two 18 GB SCSI hard drives Defining the InfoPrint Color 130 Plus to InfoPrint Manager Important: Because you are dedicating an InfoPrint Manager server to your InfoPrint Color 130 Plus, this procedure assumes that you have just installed InfoPrint Manager on this system. Your InfoPrint Manager server should not contain any objects (logical destinations, queues, or actual destinations) yet. If you are planning to use an existing InfoPrint Manager server to send jobs to your InfoPrint Color 130 Plus, you should delete all of the objects that currently exist in it before you start this procedure. When you define your InfoPrint Color 130 Plus to InfoPrint Manager, you must define it as a PSF TCP/IP-attached actual destination. The actual destination represents the physical output device. The InfoPrint Color 130 Plus must be a PSF TCP/IP printer. Use the Create Printer Wizard in the InfoPrint Manager Administration GUI to create an actual destination. Follow this procedure to define the printer using the InfoPrint Manager Administration GUI. Note: You create and configure the logical destination when you create the actual destination with the Create Printer wizard. 1. Start the InfoPrint Manager Administration GUI. 2. Select Printer → Create → PSF → TCP/IP. 3. In the first panel of the Create Printer Wizard, do these steps. a. Type a name for the actual destination in the Name field. b. Verify that the server is correct in the Server field. c. Select InfoPrintColor130Plus from the Model drop-down list. Note: If that model is not shown, you must update InfoPrint Manager to the current service level. d. Type the TCP/IP address and port number for the printer in the correct fields. e. Click Next. 4. In the second panel, type a name for the logical destination that will send jobs to this actual destination and click Next. 5. In the third panel, type a name for the queue that will submit jobs to this actual destination and click Next. 6. On the rest of the panels, accept the default values that InfoPrint Manager sets for AFP color printing by clicking Next and finally Finish. Note: See the worksheets found in "Creating and managing actual destinations" in InfoPrint Manager for AIX: Getting Started when providing the information as prompted by the wizard. 8 InfoPrint Manager for AIX: Procedures