Ricoh Priport DX 4545 Printer Reference - Page 85

2. Optional Functions Optional Document Feeder Place a stack of originals in the optional document feeder. They will be fed into the machine automatically. Originals Placing the following originals in the document feeder might damage the originals or cause misfeeds. Use the exposure glass instead. • Originals heavier than 127.9 g/m2, 34 lb • Originals lighter than 52.3 g/m2, 14 lb • Originals smaller than 148 mm × 210 mm, 5.9" × 8.3" • Originals larger than 297 mm × 864 mm, 11.7" × 34.0" • Stapled or clipped originals • Perforated or torn originals • Curled, folded, or creased originals • Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon paper, or conductive paper • Bound originals such as books • Damaged originals • Originals with glue on them • Pasted originals • Originals written in pencil • Thin and flimsy originals • Originals with index tabs • Transparent originals such as OHP transparencies or translucent paper This machine can detect the following original sizes when the original is placed in the optional document feeder. Metric version A3 L, B4 JIS L, A4 KL, B5 JIS KL, A5KL Inch version 11" × 17" L, 81/2" × 14" L, 81/2" × 11"KL, 51/2" × 81/2"KL Note ❒ Set originals only after the ink or correction fluid on them is completely dry. Not taking this precaution could stain the exposure glass and cause the stains to be printed. For standard printing, set originals as shown below. R R GRSETT1E You cannot place originals of different sizes at the same time. For thin originals, place them in the document feeder one at a time, or use the exposure glass instead. The first 5mm, 0.2", of the leading edge and the last 2mm, 0.08" of the trailing edge cannot be printed. Make sure the leading edge margin is at least 5mm, 0.2", and the trailing edge margin is at least 2mm, 0.08". 69