Ricoh Priport HQ7000 Operating Instructions - Page 41
Recommended for the LCOT, Non-recommended Paper
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Print Paper Recommended for the LCOT Paper size Paper weight Tray capacity Metric version Inch version 1 Maximum: 297 × 432 Maximum: 11.6" × 47.1 - 209.3 g/m2 mm (325 × 447 mm *1 ) 17.0" (12.7" × 17.5" *1 ) (12.5 - 55.61 lb.) 3000 sheets (80 g/m2, 20 lb.) Minimum: 70 × 148 mm Minimum: 2.8" × 5.9" (When the LCIT is in- (When the LCIT is installed: 128 × 182 mm) stalled: 5.1" × 7.1") Paper stack height: Less than 345 mm (13.5") *1 When the image position is set to 0 mm (0") Note ❒ Tray capacity is based on using high quality 80 g/m2 (20 lb.) paper. The num- ber of sheets shown is approximate. Non-recommended Paper The following types of paper are not recommended for this machine: • Roughly cut paper • Paper of different thickness in the same stack • Envelopes heavier than 85 g/m2, 22 lb. • Folded, curled, creased, or damaged paper • Damp paper • Torn paper • Slippery paper • Rough paper • Paper with any kind of coating (such as carbon) • Short grain paper • Thin paper that has low stiffness • Paper that is prone to generate a lot of paper dust • Grained paper loaded with the direction of the grain perpendicular to the feed direction • Certain types of long thin envelopes. E.g. international mail envelopes ZFXX040E 29